Sales & Service Teams now available 7 days a week!

Technical

Dual-Feed Carb Conversion


Time: 1 hour (approximately)

Tools: socket set, flat-blade screwdriver, small putty knife or scraper, adjustable wrenches (optional).

Cost: (varied) approximately $100-$300

Tinware: center-hung float fuel bowls (if needed), metering block and hardware (sold as kit), metering jets, replacement gaskets, dual-inlet fuel line.

Tip: transfer the carburetor from the engine to a clean, open workbench. If you don’t have a carb stand, simply slide four bolts of your choice through the mounting holes in the bottom plate, and “nut” them up at the top. All you need is enough clearance for the levers and protruding linkage. (see photo #1)

Performance gains: increased fuel delivery and tuning accuracy.

Read more

Understanding And Installing Torque Converters

Time: 1-2 hours

Tools: standard socket set, standard wrenches, torque wrench

Applicable years: all

Cost: $200-300 (average for non-specialized units). Prices on ultra-high performance torque converters can run into the thousands of dollars, depending on application.

Tinware: torque converter, transmission fluid

Tip: Consult with torque converter manufacturers before selecting a new converter.

Performance gains: well-balanced driveline, smoother shifts, maximize your engine’s power band

Read more

Connecting Rods And Rod Bearings

Time: 3 hours

Tools: standard socket set, rubber mallet, crankshaft socket, breaker bar, feeler gauge

Cost: approximately $50 for bearings and supplies

Tinware: quality set of rod bearings, Plastigage, 3/8”rubber hose

Tip: To avoid scratching or damaging the cylinder walls when removing or installing piston and rod assemblies, cut two short lengths of 3/8” hose and slide it over the rod bolts.

Performance gains: smooth, reliable operation from the lower rotating assembly

Read more

C7 Corvette Custom LED Lighting

Today we show off an awesome custom LED lighting option for your C7 Corvette!

Subscribe Today: http://www.youtube.com/subscription_center?add_user=EcklersAutomotive

Product Link And Description Below:

The Eckler's Auto Hub is your one stop for all your car restoration needs, we are constantly adding new videos to help you with your installation, feature great products or just provide entertainment. So check out our videos and individual channels below and don't forget to subscribe to get even more daily videos!

Read more

Corvette Electronic Ignition Conversion

http://www.youtube.com/watch?v=8s6lCCHL3_k
Today Trevor shows off a great upgrade with a stock look for your 1962-1974 Corvette!

Subscribe Today: http://www.youtube.com/subscription_center?add_user=EcklersAutomotive

Product Link And Description Below:

The Eckler's Auto Hub is your one stop for all your car restoration needs, we are constantly adding new videos to help you with your installation, feature great products or just provide entertainment. So check out our videos and individual channels below and don't forget to subscribe to get even more daily videos!

Read more

Corvette Jack Pads

http://www.youtube.com/watch?v=gCTx3qtmDeE
Today Tom shows a critical part to make sure your 1997-2015 Corvette stays safe whenever you’re doing maintenance!

Subscribe Today: http://www.youtube.com/subscription_center?add_user=EcklersAutomotive

Product Link And Description Below:

The Eckler's Auto Hub is your one stop for all your car restoration needs, we are constantly adding new videos to help you with your installation, feature great products or just provide entertainment. So check out our videos and individual channels below and don't forget to subscribe to get even more daily videos!

Read more

Corvette Induction Power Couplers

Today John shows off a great restoration idea for your Corvette, to get the best performance!

Subscribe Today: http://www.youtube.com/subscription_center?add_user=EcklersAutomotive

Product Link And Description Below:

The Eckler's Auto Hub is your one stop for all your car restoration needs, we are constantly adding new videos to help you with your installation, feature great products or just provide entertainment. So check out our videos and individual channels below and don't forget to subscribe to get even more daily videos!

Read more

Corvette Throttle Body Bypass Tube

Today Tom shows off a great way to get some extra horse power out of your 1992-2004 Corvette, the Throttle Body Bypass Tube!

Subscribe Today: http://www.youtube.com/subscription_center?add_user=EcklersAutomotive

Product Link And Description Below:

The Eckler's Auto Hub is your one stop for all your car restoration needs, we are constantly adding new videos to help you with your installation, feature great products or just provide entertainment. So check out our videos and individual channels below and don't forget to subscribe to get even more daily videos!

Read more

Corvette Skip Shift Eliminator

Today John shows off the Skip Shift for your 1997-2013 Corvette a quick solution to disable the CAG without an engine light!

Subscribe Today: http://www.youtube.com/subscription_center?add_user=EcklersAutomotive

Product Link And Description Below:

The Eckler's Auto Hub is your one stop for all your car restoration needs, we are constantly adding new videos to help you with your installation, feature great products or just provide entertainment. So check out our videos and individual channels below and don't forget to subscribe to get even more daily videos!

Read more

Search engine powered by ElasticSuite