2006-2013 Corvette Borla Exhaust System Sport S-Type Series With QuadRolled Round Tips Z06 And ZR1

• Adds Aggressive Sound Without Drone & Boosts Horsepower
• Single 3" Into Muffler, Exiting Dual 2" S-Type Exhaust System Upgrade
• 100% Aircraft Quality T-304 Stainless Steel Construction With TIG Welds
• Patented Straight-Through And Multi-Core Technology To Unleash Hidden Horsepower
• NOTE:  Getting Tips To Align Properly May Require Adjustment By Exhaust Specialist

• Quality Level:  High Performance Upgrade
• Construction:  100% T-304 Stainless Steel with TIG Welds
• Finish: Satin
• What's In The Box:  Borla Mufflers, Tubing, 4.25" Dual Round Rolled Angle-Cut Intercooled, Mounting Hardware, Installation Instructions
• Where It's Made: Made In The USA
• Manufacturer Limited Warranty:  Million Mile Warranty
• Shipping Weight:  45 lbs.
• Shipping Dimensions:  27"x16"x27"
• Approx. Installation Time:   1 Hour, Experienced Mechanic Times Quoted, Yours Will Take Longer
• Installation Difficulty:   Medium DIY

Borla Performance has once again proven why we’ve have led the aftermarket performance exhaust industry for nearly 30 years. BORLA® has an exalted heritage with Chevrolet performance vehicles. From the C5R LeMans winning Corvettes to privateers like KEC, Pratt-Miller, Lingenfelter and Lou Gigliotti who have enhanced BORLA’s knowledge of both the vehicle dynamics and the power-plant engineering. The new C6 is a muscle car with a big powerful engine on a sophisticated, sexy chassis. BORLA has always used the transfer of technology from racing to the street as a tool, and the C5, C6 and Z06 play right into that wheelhouse. With an experienced RD staff, the BORLA team has given the Chevrolet mark the attention it deserves by rolling out several new systems for the Corvette. Airflow management and exhaust engineering is a science with which BORLA has more experience than anyone in the exhaust aftermarket. BORLA® offers a variety of options for the C5, C6 and Z06. Choose from several tip styles and muffler designs. Cat-Backs™ and Rear Sections are available with either the highly popular “S-Type” muffler or the “Touring” muffler. The “S-Type” is a smaller, round muffler with a center-in/center-out configuration giving a more aggressive sound and higher flow. For those who prefer it on the milder side, we have the “Touring” muffler -- a larger case producing less aggressive sound. Some come with an assortment of tip designs. Part No. 140191 details: 3” X pipe assembly followed by a 3.00” left and right extension pipe. Connecting to the extension pipes are two 3” over-axle pipes followed by the rear muffler assembly which consists of two 3” muffler inlet pipes and two 5” diameter X 10” long round “S” style mufflers. Exiting each muffler is a 3” outlet pipe leading to a collector which splits into two 2” pipes. Connected to each pipe are the single, 4.25” diameter X 4” long, round, rolled edge angle-cut, intercooled split rear tips. RD Test Results show flows of up to 100cfm more than the factory exhaust (for a total flow of 1199 cfm @ 50” H2O). Weight Comparison: 44 lbs. while the factory system weights in at 71 lbs. Sound: 108.725 dba using SAE standard J1169 which is 12.1 dba louder than the factory exhaust. Horsepower/Torque Data: Using a Dyno Jet 248 Chassis Dynamometer, we have seen gains of up to 24 additional horsepower and 24 additional ft. lbs. torque. Borla Performance Industries, the original pioneers of high quality, austenitic stainless steel (superior to 409 or aluminized steel) free-flow exhaust utilizes patented award and race winning technology to deliver quality, sound, performance gains and enhanced fuel economy — all with an easy bolt-on installation. All BORLA street products carry an unsurpassed written million-mile warranty

2006-2013 (C6) Borla Exhaust System Sport S-Type Series,With Quad Rolled Round Tips, Z06/ZR1| 140191 Corvette