1984-1990 Corvette Rear Bumper Fiberglass ZR1 Style

• Precision Fit - Heavily Reinforced Molds Adapted From Original GM Panels & Cured 24 Hours
• Unequalled Finish - Finest Resins, 3 Layers Of 3.5 Oz Mat, 21 Mils Soft Sanding Gel Coat
• Premium Quality - Our Hand Rolled Process Is Stronger & Free Of Bubbles & Waves
• Superior Strength - Proper Reinforcements Provide Long Term Durability
• Save Time & Money - Precision Trimming Minimizes Prep
• Eckler's Select Series - Premium Quality You Can Trust
• Made In The USA
• NOTE:  Fiberglass Panels Require Fitting, Trimming, Shimming, And Special Finishing.  Unless You Are Experienced In Working With Fiberglass, Eckler’s Recommends Using A Qualified Body Shop.  Eckler's Offer The Most Complete Line Of Fiberglass Repair Materials As Well As Professional Fiberglass Prepping And Finishing DVD's - Volume 1 P/N 46383, Volume 2 P/N 46384.  Our DVDs Are Loaded With Helpful Fiberglass Prepping And Finishing Tips That Will Help You Finish Your Project Right.
• NOTE:  This Part Does Not Fit An Actual ZR1 Body

   

At first glance, all aftermarket Corvette fiberglass body panels may look the same. During the 1980's and 1990's, several aftermarket companies tried reproducing replacement body panels for America's favorite sports car. However, many short cuts were taken to save costs. The end result were body panels full of air bubbles and waves. The amount of prep work required was time consuming and frustrating for body shops and expensive for consumers. Even worse, these fiberglass body panels didn't have reinforcements so long term durability was compromised. That may be fine for a race car but definitely not OK for a driver, show car, or investment. Those were the 1980's and 1990's and definitely NEVER the case at Eckler's Corvette.

Body shops and do-it-yourself enthusiasts have trusted Eckler's Corvette as their #1 fiberglass source since 1965. They've tried other brands that just don't measure up to Eckler's Corvette in quality, durability, fit, and finish. Eckler's Corvette has invested heavily in research and development, manufacturing processes, and quality control techniques. The result is the finest quality fiberglass body panels that fit right the first time and with minimal prep work required. Eckler's Corvette fiberglass body panels are painstakingly reproduced from the original GM body panels. Eckler's Corvette overbuilds every fiberglass mold with heavy reinforcements to ensure consistent quality and a superior fit. They are NOT built using a chopper gun as with cheaper imitations. Eckler's Corvette utilizes only the best automotive grade resins with 3 layers of 3.5 ounces of mat and 21 mils of soft sanding gel coat. Eckler's superior hand-rolled fiberglass process eliminates troublesome bubbles and frustrating waves. Eckler's body panels are precision trimmed and drilled to eliminate fitment issues. All of this eliminates hassles, frustrations, and disappointments while saving you valuable time and money. Do it right the first time and insist on only the best fiberglass for your Corvette by demanding Eckler's Corvette fiberglass.

1984-1990 (C4) Premier Quality Products, Rear Bumper, Fiberglass, ZR1 Style| 13032Q Corvette