1977 Late-1978 Corvette Perfomance Air Conditioning Rotary Compressor Upgrade Kit

• Rotary Compressor & Clutch Assembly
• Compressor Mount Kit designed for a stock Chevy V8 engines with the compressor mounted on the right (passenger) side and a short water pump
• Suction Hose (from evaporator/accumulator outlet to compressor inlet)*
• Discharge Hose (from compressor outlet to condenser inlet)*
• Replacement Accumulator **
• Orifice Tube
• O-ring/Oil Tube Kit
• Installation Instructions
• BENEFITS/FEATURES:
• Affordable alternative to replacing individual parts.
• Eliminates shaft seal leak problems associated with the stock compressor.
• Simplifies conversion from the old R12 to newer 134a.
• Reduce weight.
• Continuous duty rating of 6,000 RPM.

NOTE:

* Hoses supplied with one end open, along with the corresponding fitting and crimping instructions. Your local a/c shop can provide crimping services, or we can provide the crimping service for an additional fee. Instructions for both options will be included.

** If it's still on the vehicle, the passenger-side air-induction flex hose & duct will need to be removed to allow for the compressor to be installed.

WHAT ENGINES DO THE COMPRESSOR BRACKETS FIT?

 This kit is designed for use with the newer 134a refrigerant.  

Stock Small or Big Block Chevy V8 with short water pump and compressor mounted on passenger side (right-hand) of the engine.

1977L-1978 Rotary Compressor Upgrade Kit