1969-1976 Ididit Corvette Tilt Steering Column, Chrome
Fitment
Product Details
- 8-position tilt steering column upgrade
- Chrome plated
- No modification required to install
- Includes pre-welded dash mount and separately packaged floor mount
- Bolt your original steering wheel to the column
- 4-way flasher with knob
- Turn and tilt levers
- Ignition switch with 2 keys
- Fits 1969-76 Corvettes
- Lifetime Limited Manufacturer Warranty
- 100% Made In The USA
- Column can also be used with rack and pinion steering by using a u-joint
- NOTE: The original rag joint may be used as long as it is in good working condition. It is recommended you replace it with a new one part # 25-101633
Regarding Rad Joints: A rag joint is a vibration reducer used between your column and gearbox. In some vehicles, the original rag joint is pressed onto the lower shaft of the column. If your rag joint has a pressed fit, it will need to be replaced. If your rag joint is removable, the original may be used. Please consider that due to age, the original rag joint may be worn, so please double check to make sure it is in good working condition. We always recommend replacing the rag joint.
1969-1976 Ididit Corvette Tilt Steering Column, Chrome
WARNING This product can expose you to chemicals including Nickel which is known to the State of California to cause cancer on birth defects or other reproductive harm. For more information, visit www.p65warnings.ca.gov
Base Part Number | 397583 |
---|---|
Eck OEM Number | 1520710020 |
Brand | Ididit |
Make / Model | Series | Body | Notes | Year |
---|---|---|---|---|
Make / Model Chevrolet Corvette Base | Series | Body | Notes | Year 1969, 1970, 1971, 1972, 1973, 1974 |
Make / Model Chevrolet Corvette Stingray | Series | Body | Notes | Year 1975, 1976 |