1958-1962 Corvette Steeroids Rack And Pinion Conversion Kit With Manual Steering Unpainted Column

Completely Bolt-On Tighter, More Responsive Steering Adjustable Tie Rod Ends To Eliminate Bump Steer Unpainted Steering Column Included Photo Shown With Chrome Steering Column Power Steering Hoses, Pump & Brackets In Picture Are Not Included Because This Is A Manual Steering Kit Fits Cast Iron Manifolds Only Modern Responsive Steering, Turns 2.9 Turns Lock To Lock Your C1 Corvette has always been America’s sports car.  However, they didn’t exactly know how to put the “sport” in the clunky, old technology steering design which dates back to the 1950’s. When you drive your Corvette you deserve the greatly enhanced steering control and improved feel which a modern, well engineered rack and pinion steering system can deliver. The stock factory re-circulating ball steering box which came on the Corvette is vague and unresponsive. This is especially true “on center” where modern cars with rack and pinion excel with the crisp response you have come to expect. Power steering racks offer much quicker ratios over the stock steering. Steeroids TM rack and pinion conversions for 1955-1957 Corvettes with headers yields approximately 2.5 turns lock-to-lock (power system), and 2.9 turns (manual system). As an additional benefit you get a lighter weight steering system - Steeroids TM  - rack and pinion conversions save up to 15 lbs over your stock setup, depending on how your car was originally equipped. Our kit is an entirely bolt on installation - absolutely no welding, cutting or drilling. Others claim to be bolt on but beware. The kit installs with basic hand tools in approximately 3-5 hours. On a power kit, your existing or readily available power steering pump and brackets can be used. If you choose a manual system (higher steering effort, but you save even more weight) no pump is required. The manual system is permanently lubricated, so there is no maintenance. An added feature of our kit is that you can adjust for bump steer. The only rack and pinion kit that does! Steeroids TM  rack and pinion conversion kits are complete kits; all the necessary parts are included.  The kit completely replaces all your existing steering components! Yes, that includes that leaky, heavy steering box and kludgy slave cylinder (what were they thinking).  Trust Eckler's Corvette for all your Corvette performance, accessory, and restoration needs.