Product Experts Available 1-800-284-3906

CORVETTE POWERFLOW KIT FOR ALL YEARS AND MODELS

Filter Your Result

BRAND
  1. (5)
PRICE RANGE
  1. (1)
  2. (5)
 
6 Item(s) Show per page Grid  List 
Corvette Z06 K&N Cold Air Filter Kit/ Intake System, W/Rechgr 2001-2004 Part # 25-392087-1
High Performance Cold Air Intake Upgrade Adds Up To 11.35 Rear Wheel Horsepower @ 4,700 RPM Larger Air Intake Tube And Oversized K& N Performance Air Filter Unique Pleated Air Filter Design - Straightens Incoming Air & Increases Airflow Up To 57% Over Paper Filters Improves Performance - Releases More Horsepower, Better Throttle Response, Deeper Sound Superior Engine Protection - 4 To 6 Layer Gauze & Cotton Filter Is 98.43% Efficient Re-Usable - Clean And Re-Oil  Every 12,000 to 50,000 Miles Depending On Conditions Direct-Bolt On With BasicHand Tools, No Cutting Or Drilling On OEM Parts Includes All Necessary Hardware And Detailed Instructions 1-Million Mile Limited Manufacturer Warranty Made In The USA NOTE: Not Legal For Sale Or Use In The State Of California When your stock 385HP from your 2001 Z06 or 405HP from your 2001-2004 Z06 isn't enough, you'll want to find simple, bolt-on products that improve performance. The factory air intake system is restrictive because it was designed for maximum space efficiency rather than maximum power. Should you decide to add a higher flowing exhaust or a flash computer tuner for even greater power, the factory air intake system will hold you back. The solution is this K&N high flow performance air intake system from Eckler's Corvette. The larger free-flowing tube and oversized pleated air filter are engineered to maximize performance. By minimizing restriction and straitening air flow, you'll increase airflow, improve engine efficiency, and realize up to 11.35HP at 4,700RPM to rear wheels. As a rule, anytime you can add 10HP or more to the rear wheels, you'll be able to feel to difference. In this case, you'll not only feel it but you'll hear it too! K&N's air intake system has a deeper and throatier sound under acceleration...just enough to let the competition know there's something different under your hood. The K&N C5 Z06 cold air intake features a custom carbon fiber top and bottom, integrated heat shield for colder & denser air, a roto molded urethane air intake tube with a raised K&N logo, and an oversized version of K&N's performance proven air filter. K&N's air filter is washable, cleanable, and allows you to travel up to 50,000 miles between cleanings (depending on your driving conditions). With basic hand tools you already own and by following the step-by-step instructions, you can install this air intake in as little as 90 minutes. And, installation requires no drilling, cutting, or permanent modifications. Best of all, K&N's C5 Z06 Corvette performance air intake system is made in the USA and backed by K&N's famous Million Mile limited manufacturer's warranty. Trust Eckler's Corvette for all of your C5 2001-2004 Corvette Z06 performance parts and accessories. Learn More
$442.99 Kit
1985-1991 Corvette AIRAID® Throttle Body Spacer Part # 25-339617-1
Installs In 30-45 Minutes Improves Throttle Body Air Flow Installation Instructions Included Made In The USA Developed to enhance off-idle torque from 800 rpm to approximately 3,000 rpm, PowerAid®?s unique, patented Helix Bore design spins the incoming air charge as it passes through the throttle body spacer. This spinning action boosts the velocity of the incoming air and contributes to better atomization of the air/fuel mixture as the air charge enters the combustion chamber. The end result is more part-throttle torque, improved mid-range power, and overall combustion efficiency for better fuel economy. Click the E.O. number (D-609) to find out if your application is listed. If your application is not listed then your intake system is not legal for sale or use in California and some other states. Learn More
$183.99 Kit
2014-2015 Corvette K&N Cold Air Intake System Part # 25-361402-1
Fits 2014-2018 C7 Corvette Stingrays (Will Not Fit Supercharger & Turbo Systems) High Performance Cold Air Intake Upgrade Adds Up To 12.5HP & 16.63 Lbs. Feet Of Torque To The Rear Wheels Larger Genuine Carbon Fiber Air Intake Tube And Oversized K& N Performance Air Filter Unique Pleated Air Filter Design - Straightens Incoming Air & Increases Airflow Up To 57% Over Paper Filters Improves Performance - Releases More Horsepower, Better Throttle Response, Deeper Sound Superior Engine Protection - 4 To 6 Layer Gauze & Cotton Filter Is 98.43% Efficient Direct-Bolt On With Basic Hand Tools, No Cutting Or Drilling On OEM Parts Includes All Necessary Hardware And Detailed Instructions 1-Million Mile Limited Manufacturer Warranty Made In The USA NOTE:  Cannot Be Sold Or Shipped To California & New York NOTE: Cannot Be Sold In Or Shipped To New York Or California NOTE: Re-Usable - Clean And Re-Oil  Every 12,000 to 50,000 Miles Depending On Conditions When 460HP isn't enough, you'll want to find simple, bolt-on products that improve performance without voiding your factory powertrain warranty.  The factory air intake system is restrictive because it was designed for maximum space efficiency rather than maximum power.  Should you decide to add a higher flowing exhaust or a flash computer tuner for even greater power, the factory air intake system will hold you back.  The solution is this K&N high flow performance air intake system from Eckler's Corvette.   The larger free-flowing tube and oversized pleated air filter are engineered to maximize performance.  By minimizing restriction and straitening air flow, you'll increase airflow, improve engine efficiency, and realize up to 12.5HP and 16.63 lbs. feet of torque to the rear wheels.  As a rule, anytime you can add 10HP or more to the rear wheels, you'll be able to feel to difference.  In this case, you'll not only feel it but you'll hear it too!  K&N's air intake system has a deeper and throatier sound under acceleration...just enough to let the competition know there's something different under your hood.    The K&N C7 cold air intake features a custom carbon fiber top and bottom, integrated heat shield for colder & denser air, a roto molded urethane air intake tube with a raised K&N logo, and an oversized version of K&N's performance proven air filter.  K&N's air filter is washable, cleanable, and allows you to travel up to 50,000 miles between cleanings (depending on your driving conditions).  With basic hand tools you already own and by following the step-by-step instructions, you can install this air intake in as little as 90 minutes.  And, installation requires no drilling, cutting, or permanent modifications.  Best of all, K&N's C7 Corvette performance air intake system is made in the USA and backed by K&N's famous Million Mile limited manufacturer's warranty.  Trust Eckler's Corvette for all of your C7 2014-2018 Corvette Stingray performance parts and accessories. Learn More
$419.99 ea.
2001-2004 Corvette K&N Z06 Cold Air Intake System Part # 25-362537-1
High Performance Cold Air Intake Upgrade Adds Up To 11.35 Rear Wheel Horsepower @ 4,700 RPM Larger Air Intake Tube And Oversized K& N Performance Air Filter Unique Pleated Air Filter Design - Straightens Incoming Air & Increases Airflow Up To 57% Over Paper Filters Improves Performance - Releases More Horsepower, Better Throttle Response, Deeper Sound Superior Engine Protection - 4 To 6 Layer Gauze & Cotton Filter Is 98.43% Efficient Re-Usable - Clean And Re-Oil  Every 12,000 to 50,000 Miles Depending On Conditions Direct-Bolt On With BasicHand Tools, No Cutting Or Drilling On OEM Parts Includes All Necessary Hardware And Detailed Instructions 1-Million Mile Limited Manufacturer Warranty Made In The USA NOTE: Not Legal For Sale Or Use In The State Of California When your stock 385HP from your 2001 Z06 or 405HP from your 2001-2004 Z06 isn't enough, you'll want to find simple, bolt-on products that improve performance. The factory air intake system is restrictive because it was designed for maximum space efficiency rather than maximum power. Should you decide to add a higher flowing exhaust or a flash computer tuner for even greater power, the factory air intake system will hold you back. The solution is this K&N high flow performance air intake system from Eckler's Corvette. The larger free-flowing tube and oversized pleated air filter are engineered to maximize performance. By minimizing restriction and straitening air flow, you'll increase airflow, improve engine efficiency, and realize up to 11.35HP at 4,700RPM to rear wheels. As a rule, anytime you can add 10HP or more to the rear wheels, you'll be able to feel to difference. In this case, you'll not only feel it but you'll hear it too! K&N's air intake system has a deeper and throatier sound under acceleration...just enough to let the competition know there's something different under your hood. The K&N C5 Z06 cold air intake features a custom carbon fiber top and bottom, integrated heat shield for colder & denser air, a roto molded urethane air intake tube with a raised K&N logo, and an oversized version of K&N's performance proven air filter. K&N's air filter is washable, cleanable, and allows you to travel up to 50,000 miles between cleanings (depending on your driving conditions). With basic hand tools you already own and by following the step-by-step instructions, you can install this air intake in as little as 90 minutes. And, installation requires no drilling, cutting, or permanent modifications. Best of all, K&N's C5 Z06 Corvette performance air intake system is made in the USA and backed by K&N's famous Million Mile limited manufacturer's warranty. Trust Eckler's Corvette for all of your C5 2001-2004 Corvette Z06 performance parts and accessories. Learn More
$432.99 ea.
K&N Carbon Fiber Cold Air Intake System| 63-3080 Corvette ZR1 2009-2013 Part # 25-362542-1
High Performance Cold Air Intake Upgrade Adds Up To 27.15 Rear Wheel Horsepower @ 5,984 RPM Larger Genuine Carbon Fiber Air Intake Tube And Oversized K& N Performance Air Filter Unique Pleated Air Filter Design - Straightens Incoming Air & Increases Airflow Up To 57% Over Paper Filters Improves Performance - Releases More Horsepower, Better Throttle Response, Deeper Sound Superior Engine Protection - 4 To 6 Layer Gauze & Cotton Filter Is 98.43% Efficient Re-Usable - Clean And Re-Oil  Every 12,000 to 50,000 Miles Depending On Conditions Direct-Bolt On With Basic Hand Tools, No Cutting Or Drilling On OEM Parts Includes All Necessary Hardware And Detailed Instructions 1-Million Mile Limited Manufacturer Warranty Made In The USA NOTE: Not Legal For Sale Or Use In The State Of California  When your stock 638HP from your 2009-2013 Corvette ZR1 isn't enough, you'll want to find simple, bolt-on products that improve performance without voiding your factory warranty. The factory air intake system is restrictive because it was designed for maximum space efficiency rather than maximum power. Should you decide to add a higher flowing exhaust or a flash computer tuner for even greater power, the factory air intake system will hold you back. The solution is this K&N high flow performance air intake system from Eckler's Corvette. The larger free-flowing tube and oversized pleated air filter are engineered to maximize performance. By minimizing restriction and straitening air flow, you'll increase airflow, improve engine efficiency, and realize up to 27.15HP at 5,948 RPM to rear wheels. As a rule, anytime you can add 10HP or more to the rear wheels, you'll be able to feel to difference. In this case, you'll not only feel it but you'll hear it too! K&N's air intake system has a deeper and throatier sound under acceleration...just enough to let the competition know there's something different under your hood. The K&N C6 ZR1 cold air intake features a custom carbon fiber top and bottom, integrated heat shield for colder & denser air, a lightweight genuine carbon fiber air intake tube with a raised K&N logo, and an oversized version of K&N's performance proven air filter. K&N's air filter is washable, cleanable, and allows you to travel up to 50,000 miles between cleanings (depending on your driving conditions). With basic hand tools you already own and by following the step-by-step instructions, you can install this air intake in as little as 90 minutes. And, installation requires no drilling, cutting, or permanent modifications. Best of all, K&N's C6 ZR1 Corvette performance air intake system is made in the USA and backed by K&N's famous Million Mile limited manufacturer's warranty. Trust Eckler's Corvette for all of your C6 2009-2013 Corvette ZR1 performance parts and accessories. Learn More
$930.99 Kit
Corvette (C7) K&N Cold Air Filter/Intake System, W/Rechgr 2014-18 Part # 25-392089-1
Fits 2014-2018 C7 Corvette Stingrays (Will Not Fit Supercharger & Turbo Systems) High Performance Cold Air Intake Upgrade Adds Up To 12.5HP & 16.63 Lbs. Feet Of Torque To The Rear Wheels Larger Genuine Carbon Fiber Air Intake Tube And Oversized K& N Performance Air Filter Unique Pleated Air Filter Design - Straightens Incoming Air & Increases Airflow Up To 57% Over Paper Filters Improves Performance - Releases More Horsepower, Better Throttle Response, Deeper Sound Superior Engine Protection - 4 To 6 Layer Gauze & Cotton Filter Is 98.43% Efficient Direct-Bolt On With Basic Hand Tools, No Cutting Or Drilling On OEM Parts Includes All Necessary Hardware And Detailed Instructions 1-Million Mile Limited Manufacturer Warranty Made In The USA NOTE:  Cannot Be Sold Or Shipped To California & New York NOTE: Cannot Be Sold In Or Shipped To New York Or California NOTE: Re-Usable - Clean And Re-Oil  Every 12,000 to 50,000 Miles Depending On Conditions When 460HP isn't enough, you'll want to find simple, bolt-on products that improve performance without voiding your factory powertrain warranty.  The factory air intake system is restrictive because it was designed for maximum space efficiency rather than maximum power.  Should you decide to add a higher flowing exhaust or a flash computer tuner for even greater power, the factory air intake system will hold you back.  The solution is this K&N high flow performance air intake system from Eckler's Corvette.   The larger free-flowing tube and oversized pleated air filter are engineered to maximize performance.  By minimizing restriction and straitening air flow, you'll increase airflow, improve engine efficiency, and realize up to 12.5HP and 16.63 lbs. feet of torque to the rear wheels.  As a rule, anytime you can add 10HP or more to the rear wheels, you'll be able to feel to difference.  In this case, you'll not only feel it but you'll hear it too!  K&N's air intake system has a deeper and throatier sound under acceleration...just enough to let the competition know there's something different under your hood.    The K&N C7 cold air intake features a custom carbon fiber top and bottom, integrated heat shield for colder & denser air, a roto molded urethane air intake tube with a raised K&N logo, and an oversized version of K&N's performance proven air filter.  K&N's air filter is washable, cleanable, and allows you to travel up to 50,000 miles between cleanings (depending on your driving conditions).  With basic hand tools you already own and by following the step-by-step instructions, you can install this air intake in as little as 90 minutes.  And, installation requires no drilling, cutting, or permanent modifications.  Best of all, K&N's C7 Corvette performance air intake system is made in the USA and backed by K&N's famous Million Mile limited manufacturer's warranty.  Trust Eckler's Corvette for all of your C7 2014-2018 Corvette Stingray performance parts and accessories. Learn More
$416.99 Kit
6 Item(s) Show per page Grid  List