Product Experts Available 1-800-284-3906

CORVETTE AIR INTAKE DUCTS AND RELATED FOR ALL YEARS AND MODELS

Air intake ducts from Eckler's Corvette can really bring explosive performance out of your C4, C5 or C6 Corvette. Whether your are looking to increase mileage, dress up that engine compartment up or simply gain a few extra horsepower, Eckler's Corvette has a air duct to bring out the best in your Corvette. From dual to single snorkel and LT1 to LS engines, Eckler's can get you in the winners circle with high quality performance air ducts for your Corvette.

Filter Your Result

BRAND
  1. (1)
  2. (4)
  3. (5)
PRICE RANGE
  1. (5)
  2. (9)
  3. (5)
 
19 Item(s) Show per page Grid  List 
Corvette Z06 K&N Cold Air Filter Kit/ Intake System, W/Rechgr 2001-2004 Part # 25-392087-1
High Performance Cold Air Intake Upgrade Adds Up To 11.35 Rear Wheel Horsepower @ 4,700 RPM Larger Air Intake Tube And Oversized K& N Performance Air Filter Unique Pleated Air Filter Design - Straightens Incoming Air & Increases Airflow Up To 57% Over Paper Filters Improves Performance - Releases More Horsepower, Better Throttle Response, Deeper Sound Superior Engine Protection - 4 To 6 Layer Gauze & Cotton Filter Is 98.43% Efficient Re-Usable - Clean And Re-Oil  Every 12,000 to 50,000 Miles Depending On Conditions Direct-Bolt On With BasicHand Tools, No Cutting Or Drilling On OEM Parts Includes All Necessary Hardware And Detailed Instructions 1-Million Mile Limited Manufacturer Warranty Made In The USA NOTE: Not Legal For Sale Or Use In The State Of California When your stock 385HP from your 2001 Z06 or 405HP from your 2001-2004 Z06 isn't enough, you'll want to find simple, bolt-on products that improve performance. The factory air intake system is restrictive because it was designed for maximum space efficiency rather than maximum power. Should you decide to add a higher flowing exhaust or a flash computer tuner for even greater power, the factory air intake system will hold you back. The solution is this K&N high flow performance air intake system from Eckler's Corvette. The larger free-flowing tube and oversized pleated air filter are engineered to maximize performance. By minimizing restriction and straitening air flow, you'll increase airflow, improve engine efficiency, and realize up to 11.35HP at 4,700RPM to rear wheels. As a rule, anytime you can add 10HP or more to the rear wheels, you'll be able to feel to difference. In this case, you'll not only feel it but you'll hear it too! K&N's air intake system has a deeper and throatier sound under acceleration...just enough to let the competition know there's something different under your hood. The K&N C5 Z06 cold air intake features a custom carbon fiber top and bottom, integrated heat shield for colder & denser air, a roto molded urethane air intake tube with a raised K&N logo, and an oversized version of K&N's performance proven air filter. K&N's air filter is washable, cleanable, and allows you to travel up to 50,000 miles between cleanings (depending on your driving conditions). With basic hand tools you already own and by following the step-by-step instructions, you can install this air intake in as little as 90 minutes. And, installation requires no drilling, cutting, or permanent modifications. Best of all, K&N's C5 Z06 Corvette performance air intake system is made in the USA and backed by K&N's famous Million Mile limited manufacturer's warranty. Trust Eckler's Corvette for all of your C5 2001-2004 Corvette Z06 performance parts and accessories. Learn More
$442.99 Kit
$53.99 ea.
1997-2004 Corvette Throttle Body Air Duct Hi-Performance Black Part # 25-113263-1
Increases Engine H.P. (4-5 H.P. Gain) Simple 5 Minute Installation Replaces Stock Duct Installing this part adds horsepower because the stock accordion style duct creates turbulence air as it enters the throttle body. This hi-performance model, made of silicone, smoothes out the airflow for an uninterrupted charge. Mounts with existing hardware. Instructions included. Learn More
$41.99 ea.
Corvette Duct, Intake, Power, No Logo, With Power Coupler, 1997-2000 Part # 25-320960-1
Silicone Coupler Includes (2) Clamps Replaces Stock Air Duct Imcreases Airflow Over The Factory Air Bridge Power Coupler Available In Black And Red This high flow duct is a great bolt on item that will increase your airflow & give you up to a 6HP gain, depending on mods. Connects between the mass air sensor & throttle body. Replaces the restrictive stock unit. Simple bolt on. Comes with NO emblem logo and its own power coupler. Learn More
$156.99 ea.
Corvette Intake Power Duct, Z06 Logo, With Coupler, 2001 Part # 25-320987-1
Silicone Coupler Includes (2) Clamps Replaces Stock Air Duct Increases Airflow Over The Factory Air Bridge Power Coupler Available In Black And Red This high flow duct is a great bolt on item that will increase your airflow & give you up to a 6HP gain, depending on mods. Connects between the mass air sensor & throttle body. Replaces the restrictive stock unit. Simple bolt on. Comes with Z06 emblem logo and its own power coupler. Learn More
$170.99 ea.
Corvette Intake Power Duct, 50th Anniversary Logo, With Power Coupler, 2003 Part # 25-320988-1
Silicone Coupler Includes (2) Clamps Replaces Stock Air Duct Increases Airflow Over The Factory Air Bridge Power Coupler Available In Black And Red This high flow duct is a great bolt on item that will increase your airflow & give you up to a 6HP gain, depending on mods. Connects between the mass air sensor & throttle body. Replaces the restrictive stock unit. Simple bolt on. Comes with 50th Anniversary emblem logo and its own power coupler. Learn More
$196.99 ea.
2014-2015 Corvette K&N Cold Air Intake System Part # 25-361402-1
Fits 2014-2018 C7 Corvette Stingrays (Will Not Fit Supercharger & Turbo Systems) High Performance Cold Air Intake Upgrade Adds Up To 12.5HP & 16.63 Lbs. Feet Of Torque To The Rear Wheels Larger Genuine Carbon Fiber Air Intake Tube And Oversized K& N Performance Air Filter Unique Pleated Air Filter Design - Straightens Incoming Air & Increases Airflow Up To 57% Over Paper Filters Improves Performance - Releases More Horsepower, Better Throttle Response, Deeper Sound Superior Engine Protection - 4 To 6 Layer Gauze & Cotton Filter Is 98.43% Efficient Direct-Bolt On With Basic Hand Tools, No Cutting Or Drilling On OEM Parts Includes All Necessary Hardware And Detailed Instructions 1-Million Mile Limited Manufacturer Warranty Made In The USA NOTE:  Cannot Be Sold Or Shipped To California & New York NOTE: Cannot Be Sold In Or Shipped To New York Or California NOTE: Re-Usable - Clean And Re-Oil  Every 12,000 to 50,000 Miles Depending On Conditions When 460HP isn't enough, you'll want to find simple, bolt-on products that improve performance without voiding your factory powertrain warranty.  The factory air intake system is restrictive because it was designed for maximum space efficiency rather than maximum power.  Should you decide to add a higher flowing exhaust or a flash computer tuner for even greater power, the factory air intake system will hold you back.  The solution is this K&N high flow performance air intake system from Eckler's Corvette.   The larger free-flowing tube and oversized pleated air filter are engineered to maximize performance.  By minimizing restriction and straitening air flow, you'll increase airflow, improve engine efficiency, and realize up to 12.5HP and 16.63 lbs. feet of torque to the rear wheels.  As a rule, anytime you can add 10HP or more to the rear wheels, you'll be able to feel to difference.  In this case, you'll not only feel it but you'll hear it too!  K&N's air intake system has a deeper and throatier sound under acceleration...just enough to let the competition know there's something different under your hood.    The K&N C7 cold air intake features a custom carbon fiber top and bottom, integrated heat shield for colder & denser air, a roto molded urethane air intake tube with a raised K&N logo, and an oversized version of K&N's performance proven air filter.  K&N's air filter is washable, cleanable, and allows you to travel up to 50,000 miles between cleanings (depending on your driving conditions).  With basic hand tools you already own and by following the step-by-step instructions, you can install this air intake in as little as 90 minutes.  And, installation requires no drilling, cutting, or permanent modifications.  Best of all, K&N's C7 Corvette performance air intake system is made in the USA and backed by K&N's famous Million Mile limited manufacturer's warranty.  Trust Eckler's Corvette for all of your C7 2014-2018 Corvette Stingray performance parts and accessories. Learn More
$419.99 ea.
2001-2004 Corvette K&N Z06 Cold Air Intake System Part # 25-362537-1
High Performance Cold Air Intake Upgrade Adds Up To 11.35 Rear Wheel Horsepower @ 4,700 RPM Larger Air Intake Tube And Oversized K& N Performance Air Filter Unique Pleated Air Filter Design - Straightens Incoming Air & Increases Airflow Up To 57% Over Paper Filters Improves Performance - Releases More Horsepower, Better Throttle Response, Deeper Sound Superior Engine Protection - 4 To 6 Layer Gauze & Cotton Filter Is 98.43% Efficient Re-Usable - Clean And Re-Oil  Every 12,000 to 50,000 Miles Depending On Conditions Direct-Bolt On With BasicHand Tools, No Cutting Or Drilling On OEM Parts Includes All Necessary Hardware And Detailed Instructions 1-Million Mile Limited Manufacturer Warranty Made In The USA NOTE: Not Legal For Sale Or Use In The State Of California When your stock 385HP from your 2001 Z06 or 405HP from your 2001-2004 Z06 isn't enough, you'll want to find simple, bolt-on products that improve performance. The factory air intake system is restrictive because it was designed for maximum space efficiency rather than maximum power. Should you decide to add a higher flowing exhaust or a flash computer tuner for even greater power, the factory air intake system will hold you back. The solution is this K&N high flow performance air intake system from Eckler's Corvette. The larger free-flowing tube and oversized pleated air filter are engineered to maximize performance. By minimizing restriction and straitening air flow, you'll increase airflow, improve engine efficiency, and realize up to 11.35HP at 4,700RPM to rear wheels. As a rule, anytime you can add 10HP or more to the rear wheels, you'll be able to feel to difference. In this case, you'll not only feel it but you'll hear it too! K&N's air intake system has a deeper and throatier sound under acceleration...just enough to let the competition know there's something different under your hood. The K&N C5 Z06 cold air intake features a custom carbon fiber top and bottom, integrated heat shield for colder & denser air, a roto molded urethane air intake tube with a raised K&N logo, and an oversized version of K&N's performance proven air filter. K&N's air filter is washable, cleanable, and allows you to travel up to 50,000 miles between cleanings (depending on your driving conditions). With basic hand tools you already own and by following the step-by-step instructions, you can install this air intake in as little as 90 minutes. And, installation requires no drilling, cutting, or permanent modifications. Best of all, K&N's C5 Z06 Corvette performance air intake system is made in the USA and backed by K&N's famous Million Mile limited manufacturer's warranty. Trust Eckler's Corvette for all of your C5 2001-2004 Corvette Z06 performance parts and accessories. Learn More
$432.99 ea.
K&N Carbon Fiber Cold Air Intake System| 63-3080 Corvette ZR1 2009-2013 Part # 25-362542-1
High Performance Cold Air Intake Upgrade Adds Up To 27.15 Rear Wheel Horsepower @ 5,984 RPM Larger Genuine Carbon Fiber Air Intake Tube And Oversized K& N Performance Air Filter Unique Pleated Air Filter Design - Straightens Incoming Air & Increases Airflow Up To 57% Over Paper Filters Improves Performance - Releases More Horsepower, Better Throttle Response, Deeper Sound Superior Engine Protection - 4 To 6 Layer Gauze & Cotton Filter Is 98.43% Efficient Re-Usable - Clean And Re-Oil  Every 12,000 to 50,000 Miles Depending On Conditions Direct-Bolt On With Basic Hand Tools, No Cutting Or Drilling On OEM Parts Includes All Necessary Hardware And Detailed Instructions 1-Million Mile Limited Manufacturer Warranty Made In The USA NOTE: Not Legal For Sale Or Use In The State Of California  When your stock 638HP from your 2009-2013 Corvette ZR1 isn't enough, you'll want to find simple, bolt-on products that improve performance without voiding your factory warranty. The factory air intake system is restrictive because it was designed for maximum space efficiency rather than maximum power. Should you decide to add a higher flowing exhaust or a flash computer tuner for even greater power, the factory air intake system will hold you back. The solution is this K&N high flow performance air intake system from Eckler's Corvette. The larger free-flowing tube and oversized pleated air filter are engineered to maximize performance. By minimizing restriction and straitening air flow, you'll increase airflow, improve engine efficiency, and realize up to 27.15HP at 5,948 RPM to rear wheels. As a rule, anytime you can add 10HP or more to the rear wheels, you'll be able to feel to difference. In this case, you'll not only feel it but you'll hear it too! K&N's air intake system has a deeper and throatier sound under acceleration...just enough to let the competition know there's something different under your hood. The K&N C6 ZR1 cold air intake features a custom carbon fiber top and bottom, integrated heat shield for colder & denser air, a lightweight genuine carbon fiber air intake tube with a raised K&N logo, and an oversized version of K&N's performance proven air filter. K&N's air filter is washable, cleanable, and allows you to travel up to 50,000 miles between cleanings (depending on your driving conditions). With basic hand tools you already own and by following the step-by-step instructions, you can install this air intake in as little as 90 minutes. And, installation requires no drilling, cutting, or permanent modifications. Best of all, K&N's C6 ZR1 Corvette performance air intake system is made in the USA and backed by K&N's famous Million Mile limited manufacturer's warranty. Trust Eckler's Corvette for all of your C6 2009-2013 Corvette ZR1 performance parts and accessories. Learn More
$930.99 Kit
American Car Craft Vent Tube Cover, Polished| 053085 Corvette Z06 & Z51 2014-2018 Part # 25-387122-1
100% T-304 Stainless Steel High Polished, Mirror Finish Will Not Tarnish, Fade, Or Rust Adds A Unique Look & Style To Your Car Limited Manufacturer's Warranty Made In The USA Learn More
$99.99 ea.
Corvette (C7) K&N Cold Air Filter/Intake System, W/Rechgr 2014-18 Part # 25-392089-1
Fits 2014-2018 C7 Corvette Stingrays (Will Not Fit Supercharger & Turbo Systems) High Performance Cold Air Intake Upgrade Adds Up To 12.5HP & 16.63 Lbs. Feet Of Torque To The Rear Wheels Larger Genuine Carbon Fiber Air Intake Tube And Oversized K& N Performance Air Filter Unique Pleated Air Filter Design - Straightens Incoming Air & Increases Airflow Up To 57% Over Paper Filters Improves Performance - Releases More Horsepower, Better Throttle Response, Deeper Sound Superior Engine Protection - 4 To 6 Layer Gauze & Cotton Filter Is 98.43% Efficient Direct-Bolt On With Basic Hand Tools, No Cutting Or Drilling On OEM Parts Includes All Necessary Hardware And Detailed Instructions 1-Million Mile Limited Manufacturer Warranty Made In The USA NOTE:  Cannot Be Sold Or Shipped To California & New York NOTE: Cannot Be Sold In Or Shipped To New York Or California NOTE: Re-Usable - Clean And Re-Oil  Every 12,000 to 50,000 Miles Depending On Conditions When 460HP isn't enough, you'll want to find simple, bolt-on products that improve performance without voiding your factory powertrain warranty.  The factory air intake system is restrictive because it was designed for maximum space efficiency rather than maximum power.  Should you decide to add a higher flowing exhaust or a flash computer tuner for even greater power, the factory air intake system will hold you back.  The solution is this K&N high flow performance air intake system from Eckler's Corvette.   The larger free-flowing tube and oversized pleated air filter are engineered to maximize performance.  By minimizing restriction and straitening air flow, you'll increase airflow, improve engine efficiency, and realize up to 12.5HP and 16.63 lbs. feet of torque to the rear wheels.  As a rule, anytime you can add 10HP or more to the rear wheels, you'll be able to feel to difference.  In this case, you'll not only feel it but you'll hear it too!  K&N's air intake system has a deeper and throatier sound under acceleration...just enough to let the competition know there's something different under your hood.    The K&N C7 cold air intake features a custom carbon fiber top and bottom, integrated heat shield for colder & denser air, a roto molded urethane air intake tube with a raised K&N logo, and an oversized version of K&N's performance proven air filter.  K&N's air filter is washable, cleanable, and allows you to travel up to 50,000 miles between cleanings (depending on your driving conditions).  With basic hand tools you already own and by following the step-by-step instructions, you can install this air intake in as little as 90 minutes.  And, installation requires no drilling, cutting, or permanent modifications.  Best of all, K&N's C7 Corvette performance air intake system is made in the USA and backed by K&N's famous Million Mile limited manufacturer's warranty.  Trust Eckler's Corvette for all of your C7 2014-2018 Corvette Stingray performance parts and accessories. Learn More
$416.99 Kit
Edelbrock 3815 Efi Intake Elbow Universal 100 Deg 120Mm T.B. To 4500 Dominator Flange Part # 25-398861-1
Efi Intake Elbow Universal 100 Deg 120Mm T.B. To 4500 Dominator Flange 4.1" Bore; 0.041" Compressed; 9.2cc Volume Learn More
$171.99 ea.
Edelbrock 3814 Efi Intake Elbow Universal 100 Deg 95Mm T.B. To 4500 Dominator Flange Tall Profi Part # 25-398864-1
Efi Intake Elbow Universal 100 Deg 95Mm T.B. To 4500 Dominator Flange Tall Profile 4.23" Bore; 0.038" Compressed; 8.75cc Volume Learn More
$157.99 ea.
Edelbrock 3849 High Flow Intake Elbow; 95Mm Throttle Body To Square-Bore Flange; As-Cast Finish Part # 25-454598-1
These elbows are designed for use in high hp race applications. An internal divider optimizes flow distribution to all ports of the manifold by reducing turbulence. High Flow Elbow #3849 is an ultra high flow version which measures 4.50" from flange to throttle body centerline (7.75" overall height). During flow testing this elbow provided up to 1,050 cfm with a 90mm throttle body and 1,150 cfm with a 95mm throttle body. Does not accept LS1 throttle bodies. Intake Elbow #3814 has a universal bolt pattern and is the best way to adapt a single throttle body to a Dominator® 4500 style flange EFI manifold without sacrificing air flow. The throttle body flange accepts 90-95mm LS1, LS2 and Ford 5.0L based throttle bodies. Intake Elbow #3815 is also engineered for use on a Dominator 4500 style flange manifold. It has a 120mm opening for maximum flow and is capable of over 1,400 naturally aspirated hp. The throttle body flange uses a 4.250" square bolt pattern. This elbow flows 1,800 cfm @ 20.5 in H2O. Includes a universal throttle bracket. Learn More
$141.99 ea.
Edelbrock 38493 High Flow Intake Elbow; 95Mm Throttle Body To Square-Bore Flange; Black Finish Part # 25-454599-1
These elbows are designed for use in high hp race applications. An internal divider optimizes flow distribution to all ports of the manifold by reducing turbulence. High Flow Elbow #3849 is an ultra high flow version which measures 4.50" from flange to throttle body centerline (7.75" overall height). During flow testing this elbow provided up to 1,050 cfm with a 90mm throttle body and 1,150 cfm with a 95mm throttle body. Does not accept LS1 throttle bodies. Intake Elbow #3814 has a universal bolt pattern and is the best way to adapt a single throttle body to a Dominator® 4500 style flange EFI manifold without sacrificing air flow. The throttle body flange accepts 90-95mm LS1, LS2 and Ford 5.0L based throttle bodies. Intake Elbow #3815 is also engineered for use on a Dominator 4500 style flange manifold. It has a 120mm opening for maximum flow and is capable of over 1,400 naturally aspirated hp. The throttle body flange uses a 4.250" square bolt pattern. This elbow flows 1,800 cfm @ 20.5 in H2O. Includes a universal throttle bracket. Learn More
$160.99 ea.
2001-2004 Corvette C5 Vararam Power Duct Part # 25-314549-1
Superior Quality Construction Flows Quicker Air For More Horsepower! Full Adjustability This Enables The Unit To Fit A Wide Range Of Intake Combinations After hundreds of hours on the flow bench comparing the VR design to the very best the competition had to offer, we are proud to present the VR power duct for the C5 Corvette. The VR was engineered for stock to high horsepower cars of 500-700 rear wheel HP! This unit can be used with the VR B2 System, Blackwing, K&N and many more and use it you should, because the VR out flowed the very best by over 15% @ 28 inches of water and 20% @10 inches through the throttle body! We only flow through the Throttlebody, flowing a duct by itself tells you nothing of its true flow capabilities as delivered into the intake manifold. The key to its performance is in its Patent Pending reverse venturi design with integrated rear air horn. It's not about making a bigger hole for airflow, its about streamlining the existing airflow while increasing the overall volume delivered at the highest possible velocity at each RPM level THROUGH THE MAF AND THROTTLE BODY! Learn More
$104.99 ea.
1997-2000 Corvette C5 Vararam Power Duct Part # 25-314484-1
Superior Quality Construction Flows Quicker Air For More Horsepower! Full Adjustability This Enables The Unit To Fit A Wide Range Of Intake Combinations After hundreds of hours on the flow bench comparing the VR design to the very best the competition had to offer, we are proud to present the VR power duct for the C5 Corvette. The VR was engineered for stock to high horsepower cars of 500-700 rear wheel HP! This unit can be used with the VR B2 System, Blackwing, K&N and many more and use it you should, because the VR out flowed the very best by over 15% @ 28 inches of water and 20% @10 inches through the throttle body! We only flow through the Throttlebody, flowing a duct by itself tells you nothing of its true flow capabilities as delivered into the intake manifold. The key to its performance is in its Patent Pending reverse venturi design with integrated rear air horn. It's not about making a bigger hole for airflow, its about streamlining the existing airflow while increasing the overall volume delivered at the highest possible velocity at each RPM level THROUGH THE MAF AND THROTTLE BODY! Learn More
$106.99 ea.
2008-2013 Corvette Vararam Power Wedge LS3 Part # 25-314550-1
8-12 HP Gain! Increases Air Flow Up To 10% Easy Bolt On Installation The Power wedge was born from the VRX Intake manifold program. Our research showed that most of the OEM manifolds had the intake manifold neck pointed upward at about 8 degrees. This is done in order to clear the water pumps and to soften throttle tip in response. In this position , at wide open throttle the blade extends into the manifold neck and plenum up to 1 full inch downward angle position. This blocks a portion of the lower section of the flow path. In short This means that when you are at WIDE open throttle you are only getting about 88-92% of the flow that is possible from whatever throttle body you are running. The Power wedge can be used on a stock car or a car making insane HP numbers, stroker motors and supercharged applications. They all work with the "VR Power Wedge!" The Torque Curve will amaze you! It will be from 2,000RPM all the way to red line! Learn More
$79.99 ea.
     
Out of stock
19 Item(s) Show per page Grid  List