Product Experts Available 1-800-284-3906

CORVETTE AIR INDUCTION SYSTEMS FOR ALL YEARS AND MODELS

Air intake induction systems from Eckler's Corvette can really bring explosive performance out of your C4, C5 or C6 Corvette. Whether your are looking to increase mileage, dress up that engine compartment up or simply gain a few extra horsepower, Eckler's Corvette has a air induction system to bring out the best in your Corvette. From dual to single snorkel and LT1 to LS engines, Eckler's can get you in the winners circle with high quality performance air intake induction systems for your Corvette.

Filter Your Result

BRAND
  1. (1)
  2. (1)
  3. (1)
  4. (13)
  5. (2)
PRICE RANGE
  1. (1)
  2. (3)
  3. (4)
  4. (6)
  5. (56)
  6. (1)
 
Items 1 to 24 of 71 total Show per page Page:
  1. 1
  2. 2
  3. 3
  4. Next Page
Grid  List 
1985-2013 Corvette AIRAID® Air Filter Tune Up Kit Part # 25-324318-1
Made Exclusively For Airaid Filters Tune Up Should Be Performed Every 30-50K Kit Includes 12 Oz Cleaner And 6.25 Oz Aerosol Spray Oil AIRAID® Cleaning Solution is uniquely formulated to clean without damaging the gauze filter media. AIRAID® Performance Oil Forms an additional line of defense against dirt without limiting airflow. Clean your AIRAID® filter every 30,000 to 50,000 miles for normal driving, or more often for off-road and heavy dust conditions. If your annual mileage is low, be sure to check the filter once a year to see if oiling is needed. Learn More
$12.99 Kit
1985-2013 Corvette AIRAID® Air Filter Tune Up Kit Blue Part # 25-324294-1
Made Exclusively For Airaid Filters Tune Up Should Be Performed Every 30-50K Kit Includes 12 Oz Cleaner And 6.25 Oz Aerosol Spray Oil Blue Color AIRAID® Cleaning Solution is uniquely formulated to clean without damaging the gauze filter media. AIRAID® Performance Oil Forms an additional line of defense against dirt without limiting airflow. Clean your AIRAID® filter every 30,000 to 50,000 miles for normal driving, or more often for off-road and heavy dust conditions. If your annual mileage is low, be sure to check the filter once a year to see if oiling is needed. Now available in Blue. Learn More
$12.99 Kit
1990-95ZR1 & 1992-1996 LT1 Corvette SLP Tri-Flow Cold Air Induction Kit Part # 25-112231-1
High Flow Air Intake Adds Up To 20HP Stainless Steel Tubing w/Black Powder Coating Includes Three SLP Blackwing  Reusable Cone Type Air Filters, All Necessary Hardware, & Instructions Installs In Approximately 1 Hour With Basic Hand Tools Made In The USA Lifetime Manufacturer Warranty NOTE: Not legal for sale in California or New York Learn More
$323.99 Kit
Corvette Z06 K&N Cold Air Filter Kit/ Intake System, W/Rechgr 2001-2004 Part # 25-392087-1
High Performance Cold Air Intake Upgrade Adds Up To 11.35 Rear Wheel Horsepower @ 4,700 RPM Larger Air Intake Tube And Oversized K& N Performance Air Filter Unique Pleated Air Filter Design - Straightens Incoming Air & Increases Airflow Up To 57% Over Paper Filters Improves Performance - Releases More Horsepower, Better Throttle Response, Deeper Sound Superior Engine Protection - 4 To 6 Layer Gauze & Cotton Filter Is 98.43% Efficient Re-Usable - Clean And Re-Oil  Every 12,000 to 50,000 Miles Depending On Conditions Direct-Bolt On With BasicHand Tools, No Cutting Or Drilling On OEM Parts Includes All Necessary Hardware And Detailed Instructions 1-Million Mile Limited Manufacturer Warranty Made In The USA NOTE: Not Legal For Sale Or Use In The State Of California When your stock 385HP from your 2001 Z06 or 405HP from your 2001-2004 Z06 isn't enough, you'll want to find simple, bolt-on products that improve performance. The factory air intake system is restrictive because it was designed for maximum space efficiency rather than maximum power. Should you decide to add a higher flowing exhaust or a flash computer tuner for even greater power, the factory air intake system will hold you back. The solution is this K&N high flow performance air intake system from Eckler's Corvette. The larger free-flowing tube and oversized pleated air filter are engineered to maximize performance. By minimizing restriction and straitening air flow, you'll increase airflow, improve engine efficiency, and realize up to 11.35HP at 4,700RPM to rear wheels. As a rule, anytime you can add 10HP or more to the rear wheels, you'll be able to feel to difference. In this case, you'll not only feel it but you'll hear it too! K&N's air intake system has a deeper and throatier sound under acceleration...just enough to let the competition know there's something different under your hood. The K&N C5 Z06 cold air intake features a custom carbon fiber top and bottom, integrated heat shield for colder & denser air, a roto molded urethane air intake tube with a raised K&N logo, and an oversized version of K&N's performance proven air filter. K&N's air filter is washable, cleanable, and allows you to travel up to 50,000 miles between cleanings (depending on your driving conditions). With basic hand tools you already own and by following the step-by-step instructions, you can install this air intake in as little as 90 minutes. And, installation requires no drilling, cutting, or permanent modifications. Best of all, K&N's C5 Z06 Corvette performance air intake system is made in the USA and backed by K&N's famous Million Mile limited manufacturer's warranty. Trust Eckler's Corvette for all of your C5 2001-2004 Corvette Z06 performance parts and accessories. Learn More
$442.99 Kit
Chevy Edelbrock 2069 Dual Quad Kit Perf Rpm 409 "W" Lg Port Part # 25-397609-1
A huge hit among street rodders, these Dual-Quad Kits offer the ultimate set-up for anyone who wants the look and the performance of dual-quad carbs. They include an Edelbrock RPM or RPM Air-Gap Dual-Quad intake manifold and two 500 cfm Thunder Series AV. Learn More
$1,422.99 ea.
2006-2013 Corvette Volant Closed Box Cold Air Intake Kit 2006-2009 Chevy Corvette Z06 7.0L & 2008-2013 Corvette 6.2L Part # 25-855971-1
Gain Up To 18hp 2006-2009 Corvette Z06 7.0L 2008-2013 Corvette 6.2L Replaces Stock Air Cleaner & Air Duct Volant's Power Intake Systems are an ideal way to give your Corvette more horsepower and more torque. And because the air cleaner housing/connector and Power Air Duct are made of a high strength polyethylene material it won't act as a heat sink, which reduces power, the way some other systems can. In addition to the high flow filter(s) of the Volant System you also receive the Power Air Duct which is larger than stock to yield more airflow. MAF housing is not included with the kit. Learn More
$399.99 Kit
Corvette LG Motorsports Mono Ball Control Arm Kit, 1997-2013 Part # 25-323784-1
Improves Handling Stainless Steel Ball W/ Teflon Lined Race Includes Mono Ball Housings, Bearings, Clips, Spacers, & Cross Shafts Where Needed Instructions Included Coming directly from our World Challenge and GrandAm racing projects, this kit is now ready for you to install at home. What does this do for you the home user? These will allow the arms to pivot in a smooth, and correct motion like they are suppose to. No more deflection under loading, no more changing in toe resulting in a nervous feeling Corvette on track! This kit uses a high quality stainless ball with a Teflon lined race so you will have years of trouble free life from the bearings. Unlike other kits on the market today that require you to glue the bearing races into the control arms, this kit is precisely machined to be a close press fit that will not move without having to resort to glue to hold it. This process can be done at home with a little bit of fire and ice. Kits include: mono ball housings, bearings, retaining clips, spacers, cross shafts (where needed) and instructions. Bearings are pre-assembled in the housings before shipment to the user. Kits are available for all four control arms. Learn More
$1,799.99 Kit
2001-2004 Corvette Air Intake System Twin Flow Polished Aluminum Part # 25-157381-1
Improves Horsepower (3-1/2" Merged Air Tubes) Washable Hi-Performance Air Filters No Modifications To Car Required Simple 5 Minute Installation Learn More
$174.99 ea.
1990-1996 Corvette Vortex Rammer Cold Air System BPP With Black Cover Part # 25-112493-1
Replaces Stock Air Box Up to 22hp Increase 5mph & 3.5 Tenths in 1/4   Mile The Vortex Rammer obtains cool, pressurized air from the radiator cavity, drives it through the radiator shroud into the specialty designed scoop and forces it into the Rammer sealed box. On C4's it is then routed into a revolutionary air cleaner that contains an internal velocity stack. The radiator shroud requires a simple cut-out on all installations. Installation hardware and instructions included.     Learn More
$310.99 Kit
1997-2004 Corvette BBK Cold Air Induction System Polished Aluminum Part # 25-161591-1
Includes: Molded Silicone Hoses, Stainless Steel Clamps, High-Flow Washable Cotton Element Air Filter Yields 7-21 Horsepower Improvement BBK Power-Plus Cold Air Intake Systems are not for the faint of heart. You better be prepared for some white-knuckle driving after you bolt this bad boy onto your engine. BBK custom designs and dyno tests each Power-Plus Cold Air Intake to deliver maximum airflow into your vehicle’s powerplant, giving it the fresh supply of clean, cold oxygen it needs to belch out asphalt-shredding horsepower.Only premium materials are used in the construction of your BBK Power-Plus Cold Air Intake System. From the high-flow conical-shaped cotton gauze air filter down to the choice aluminum tubes, not a single corner is cut. Many systems are CNC mandrel-bent for resistance-free airflow, unleashing an average of 7-21 horsepower to the rear wheels. Learn More
$369.99 Kit
1997-2000 Corvette Intake Dual Air System Chrome Plated Part # 25-320910-1
This  twin flow  air intake will greatly increase your airflow and create more horsepower. It comes with two lifetime filters, cleaner fluid and air filter oil. Installation requires no cutting or drilling.  Clean and oil air filters every 12,000 - 25,000 miles (depending on conditions) Kit includes: (1) Dual air filter intake tube - triple chrome plated steel (2) Lifetime - AirAid high flow washable air filters (1) Filter recharge kit (1) Installation hardware kit NOTE:  Individual filter dimensions: filter length 7.5" filter inlet diameter 3.5" filter diameter at widest point 5.5" Instructions: Remove 3/4” breather line from driver’s side of the factory air box lid. Leave the plastic elbowand grommet attached to the line; this will be used later. Remove factory air box. Including filter, base, cover, two metal straps, stainless pinch clamps on mass air flow meter inlet and two rubber hold-downs with threaded posts. (Located in the front bumper support). Run factory breather tube with plastic elbow and grommet (This was removed in step 1) along driver’s side toward front of vehicle and insert into 3/4” hole on new air tube. Slip assembly over mass air flow meter inlet and lightly snug band clamp. (Grommet will be on the driver’s side). Fully tighten all clamps. Learn More
$318.99 Kit
2006-2013 Corvette K&N Cold Air Intake System Z06 LS7 Part # 25-176347-1
Fits 2006-2013 Corvette Z06 & 2013 427 Convertible Adds Up To 27.22 Horsepower To The Rear Wheels At 5,500 RPM Larger Air Intake Tube And Oversized K& N Performance Air Filter Superior Roto Molded Urethane Construction With Raised K& N Logo Unique Pleated Air Filter Design - Straightens Incoming Air & Increases Airflow Up To 57% Over Paper Filters Improves Performance - Releases More Horsepower, Better Throttle Response, Deeper Sound Superior Engine Protection - 4 To 6 Layer Gauze & Cotton Filter Is 98.43% Efficient Re-Usable - Clean And Re-Oil  Every 12,000 to 50,000 Miles Depending On Conditions Direct-Bolt On With Basic Hand Tools, No Cutting Or Drilling On OEM Parts Includes All Necessary Hardware And Detailed Instructions 1-Million Mile Limited Manufacturer Warranty Made In The USA NOTE: Not Legal For Sale Or Use In The State Of California When 505HP isn't enough from your LS7 powered Z06, you'll want to find simple, bolt-on products that improve performance without voiding your factory powertrain warranty.  The factory air intake system is restrictive because it was designed for maximum space efficiency rather than maximum power.  Should you decide to add a higher flowing exhaust or a flash computer tuner for even greater power, the factory air intake system will hold you back.  The solution is this K&N high flow performance air intake system from Eckler's Corvette.   The larger free-flowing tube and oversized pleated air filter are engineered to maximize performance.  By minimizing restriction and straitening air flow, you'll increase airflow, improve engine efficiency, and realize up to 27.22 horsepower to the rear wheels.  As a rule, anytime you can add 10HP or more to the rear wheels, you'll be able to feel to difference.  In this case, you'll not only feel it but you'll hear it too!  K&N's air intake system has a deeper and throatier sound under acceleration...just enough to let the competition know there's something different under your hood.    The K&N C6 2006-2013 Z06 cold air intake features a custom carbon fiber top and bottom, a roto molded urethane air intake tube with a raised K&N logo, and an oversized version of K&N's performance proven air filter.  K&N's air filter is washable, cleanable, and allows you to travel up to 50,000 miles between cleanings (depending on your driving conditions).  With basic hand tools you already own and by following the step-by-step instructions, you can install this air intake in as little as 90 minutes.  And, installation requires no drilling, cutting, or permanent modifications.  Best of all, K&N's C6 Corvette performance air intake system is made in the USA and backed by K&N's famous Million Mile limited manufacturer's warranty.  Trust Eckler's Corvette for all of your C6 Z06 2006-2013 Corvette performance, restoration, and accessory parts. Learn More
$505.99 Kit
K&N Air Corvette Induction System, 2008-2013 Part # 25-249619-1
Fits 2008-2013 C6 Corvettes High Performance Cold Air Intake Upgrade Adds Up To 17.72 Horsepower To The Rear Wheels At 4,750 RPM Larger Roto Molded Urethane Air Intake Tube And Oversized K& N Performance Air Filter Unique Pleated Air Filter Design - Straightens Incoming Air & Increases Airflow Up To 57% Over Paper Filters Improves Performance - Releases More Horsepower, Better Throttle Response, Deeper Sound Superior Engine Protection - 4 To 6 Layer Gauze & Cotton Filter Is 98.43% Efficient Re-Usable - Clean And Re-Oil  Every 12,000 to 50,000 Miles Depending On Conditions Direct-Bolt On With Basic Hand Tools, No Cutting Or Drilling On OEM Parts Includes All Necessary Hardware And Detailed Instructions 1-Million Mile Limited Manufacturer Warranty Made In The USA NOTE: Not Legal For Sale Or Use In The State Of California When 430HP isn't enough, you'll want to find simple, bolt-on products that improve performance without voiding your factory powertrain warranty.  The factory air intake system is restrictive because it was designed for maximum space efficiency rather than maximum power.  Should you decide to add a higher flowing exhaust or a flash computer tuner for even greater power, the factory air intake system will hold you back.  The solution is this K&N high flow performance air intake system from Eckler's Corvette.   The larger free-flowing tube and oversized pleated air filter are engineered to maximize performance.  By minimizing restriction and straitening air flow, you'll increase airflow, improve engine efficiency, and realize up to 17.72 horsepower to the rear wheels.  As a rule, anytime you can add 10HP or more to the rear wheels, you'll be able to feel to difference.  In this case, you'll not only feel it but you'll hear it too!  K&N's air intake system has a deeper and throatier sound under acceleration...just enough to let the competition know there's something different under your hood.    The K&N C6 2008-2013 cold air intake features a custom carbon fiber top and bottom, a roto molded urethane air intake tube with a raised K&N logo, and an oversized version of K&N's performance proven air filter.  K&N's air filter is washable, cleanable, and allows you to travel up to 50,000 miles between cleanings (depending on your driving conditions).  With basic hand tools you already own and by following the step-by-step instructions, you can install this air intake in as little as 90 minutes.  And, installation requires no drilling, cutting, or permanent modifications.  Best of all, K&N's C6 Corvette performance air intake system is made in the USA and backed by K&N's famous Million Mile limited manufacturer's warranty.  Trust Eckler's Corvette for all of your C6 2008-2013 Corvette performance, restoration, and accessory parts. Learn More
$521.99 Kit
2001-2004 Corvette Air Induction Blackwing LS1/LS6 SLP Part # 25-113531-1
Yields Up To 16hp Installs on Stock Cushions Cleanable Filter Built-In Flow Indicator-Tells When Cleaning Required The Blackwing LS1/LS6 air induction looks like a factory installed part and adds big horsepower and torque figures. A special, high-temperature plastic housing mounts on the stock cushions and clamps to the stock intake. Learn More

Was: $334.99 ea.

Now: $215.99 ea.

2005-2007 Corvette K&N Cold Air Intake System LS2 Part # 25-168829-1
Fits  2005-2007 C6 Corvettes High Performance Cold Air Intake Upgrade Adds Up To 10.05 Horsepower To The Rear Wheels At 6,000 RPM Larger Roto Molded Urethane Air Intake Tube And Oversized K& N Performance Air Filter Unique Pleated Air Filter Design - Straightens Incoming Air & Increases Airflow Up To 57% Over Paper Filters Improves Performance - Releases More Horsepower, Better Throttle Response, Deeper Sound Superior Engine Protection - 4 To 6 Layer Gauze & Cotton Filter Is 98.43% Efficient Re-Usable - Clean And Re-Oil  Every 12,000 to 50,000 Miles Depending On Conditions Direct-Bolt On With Basic Hand Tools, No Cutting Or Drilling On OEM Parts Includes All Necessary Hardware And Detailed Instructions 1-Million Mile Limited Manufacturer Warranty Made In The USA NOTE: Not Legal For Sale Or Use In The State Of California When 400HP isn't enough, you'll want to find simple, bolt-on products that improve performance without voiding your factory powertrain warranty.  The factory air intake system is restrictive because it was designed for maximum space efficiency rather than maximum power.  Should you decide to add a higher flowing exhaust or a flash computer tuner for even greater power, the factory air intake system will hold you back.  The solution is this K&N high flow performance air intake system from Eckler's Corvette.   The larger free-flowing tube and oversized pleated air filter are engineered to maximize performance.  By minimizing restriction and straitening air flow, you'll increase airflow, improve engine efficiency, and realize up to 10.05 horsepower to the rear wheels.  As a rule, anytime you can add 10HP or more to the rear wheels, you'll be able to feel to difference.  In this case, you'll not only feel it but you'll hear it too!  K&N's air intake system has a deeper and throatier sound under acceleration...just enough to let the competition know there's something different under your hood.    The K&N C6 2005-2007 cold air intake features a custom carbon fiber top and bottom, a roto molded urethane air intake tube with a raised K&N logo, and an oversized version of K&N's performance proven air filter.  K&N's air filter is washable, cleanable, and allows you to travel up to 50,000 miles between cleanings (depending on your driving conditions).  With basic hand tools you already own and by following the step-by-step instructions, you can install this air intake in as little as 90 minutes.  And, installation requires no drilling, cutting, or permanent modifications.  Best of all, K&N's C6 Corvette performance air intake system is made in the USA and backed by K&N's famous Million Mile limited manufacturer's warranty.  Trust Eckler's Corvette for all of your C6 2005, 2006, and 2007 Corvette performance, restoration, and accessory parts. Learn More
$425.99 Kit
1973-1976 Corvette Cowl Induction Flapper Valve Solenoid Part # 25-289378-1
Reproduction of Original Highest Quality Available from Classic Headquarters Correct Part Number Stamping 1-year Manufacturer's Warranty This Corvette Reproduction Cowl Induction Flapper Valve Solenoid is a new superior reproduction of a part which had a high failure rate. All New Tooling insures your cowl induction Corvette will be getting all the fresh air it needs when you need it! Learn More
$43.99 ea.
1973-1975 Corvette (C3) Air Intake Flapper Valve Door Retainer Part # 25-333124-1
Quality Restoration Part Retains Flapper Door Set of Three Are you looking for quality restoration parts for your Corvette? Look no further than Ecklers. We invented the restoration business! Learn More
$7.49 Set
2001-2004 Corvette AIRAID® Cold Air Dam Intake System With Red SynthaFlow Filter Part # 25-339607-1
Includes A Premium SynthaFlow Oiled Air Filter Filter Typically Doesn't Need Cleaning For 30-50K Miles Installation Instructions Included Made In The USA   The AIRAID MXP Series represents the ultimate in Cold Air Induction systems. Designed for high-performance, the MXP Intakes start with a new one piece roto-molded air box that addresses all the shortcomings of the restrictive factory design. Then AIRAID® adds a new air intake tube constructed of cross-linked, high-density Polyethylene that is designed using extensive computer modeling to maintain proper mass air flow readings and calibration. They also frequently have a built-in velocity stack, which further promotes airflow. What this all means is a simple-to-install system that was designed using extremely sophisticated technology to increase airflow while maintaining proper air / fuel ratios, therefore eliminating the need for re-calibration once installation is complete. Just bolt it on and go! Like any other AIRAID® Intake System, the MXP includes an AIRAID® Premium Filter that is sized to maximize power and efficiency. Learn More
$385.99 Kit
2014-2017 Corvette aFe Momentum Intake System Pro 5R Part # 25-344819-1
Unleashes A Dyno Proven 18HP and 22 Lbs. Ft. Torque Outlows Factory Intake By 42% One Piece Sealed Housing Draws Only Cold Air Massive 7" 5-Layer Cone Performance Air Filter (Cleanable & Lifetime) CAD Designed Roto Molded Tube And Built-In Resonance Chamber See Through Sight Window For Easier Filter Inspection Direct-Bolt On (No Cutting Or Drilling On OEM Parts) Stainless Steel T-Bolt Clamps C.A.R.B. 50-State Legal Pending 2-Year Limited Warranty Made In The USA NOTE:  Cannot Be Sold Or Shipped To California & New York C7 2014-2018 Stingray owners have 460HP from the factory. Once you're used to all that power, you'll want even more. The first and easiest modification you should make is making your Stingray breathe better. The factory air intake is designed for emission and sound controls which restricts airflow and performance. Eckler's Corvette has the solution: the AFE Momentum Pro 5R intake system! It unleashes an extra 18 tire roasting horsepower and 22 lbs. ft. of torque. Plus, it flows a whopping 42% more air than the factory system. This unique system was CAD designed by the engineering experts at AFE so everything fits just like it should with no cutting or drilling of your OEM parts. A lifetime high performance gauze and cotton 5-layer 7" cone air filter is an integral part of the system. Just clean and re-oil every 25,000 miles...for life! Their system even includes a see through site window to make filter inspection fast and easy. The AFE Momentum Pro 5R air intake system is THE air intake system to get! Trust Eckler's Corvette for all of your C7 2014-2018 Corvette Stingray performance parts and accessories. Learn More
$538.99 ea.
2008-2013 Corvette AIRAID® Air Intake System LS3 SynthaMax Part # 25-279701-1
No Oil Required Wash, Dry and Install Last Filter Ever Needed Manufacturer Lifetime Warranty   SynthaMax has a unique appearance for a synthetic filter, a Performance Red colorfast finish that won’t fade over the years. This new filter looks so much like its SynthaFlow cousin that it has been marked with “SynthaMax, Do Not Oil” for easy identification. The SynthaMax Non-Oiled media means cleaning is as easy as Wash it, Let it Dry, and Re-Install. This Made in the USA filter is the last that you will ever need to buy for your Corvette and is backed with AIRAID’s Lifetime No-Hassle Warranty Learn More
$374.99 Kit
2005-2007 Corvette AIRAID® Air Intake System LS2 SynthaMax Part # 25-279700-1
No Oil Required Wash, Dry and Install Last Filter Ever Needed Manufacturer Lifetime Warranty   SynthaMax has a unique appearance for a synthetic filter, a Performance Red colorfast finish that won’t fade over the years. This new filter looks so much like its SynthaFlow cousin that it has been marked with “SynthaMax, Do Not Oil” for easy identification. The SynthaMax Non-Oiled media means cleaning is as easy as Wash it, Let it Dry, and Re-Install. This Made in the USA filter is the last that you will ever need to buy for your Corvette and is backed with AIRAID’s Lifetime No-Hassle Warranty Learn More
$363.99 Kit
2008-2013 Corvette LG Motorsports Carbon Fiber Cold Air Intake System LS7 LS3 Part # 25-323777-1
12-15 Horsepower Increase! Washable Filter Easy Bolt On Installation (15 Minutes) MAF Is Not Included All Carbon Fiber From LG Motorsports comes an exciting new air intake for your C6 Z06 or 2008+ C6 (LS3). Made entirely of carbon fiber, this high-flow air intake will not only increase your Corvette's performance, but will also dress up your engine bay at the same time! This intake has shown an increase of 12-15 rwhp over the factory stock intake system Learn More
$719.99 ea.
Corvette AIRAID® Cold Air Dam Intake System With Blue SynthaMax Filter, 2001-2004 Part # 25-339612-1
Includes A Premium SynthaMax Non-Oiled Air Filter Filter Is Washable And Reusable With A Lifetime Warranty Installation Instructions Included Made In The USA   The AIRAID MXP Series represents the ultimate in Cold Air Induction systems. Designed for high-performance, the MXP Intakes start with a new one piece roto-molded air box that addresses all the shortcomings of the restrictive factory design. Then AIRAID® adds a new air intake tube constructed of cross-linked, high-density Polyethylene that is designed using extensive computer modeling to maintain proper mass air flow readings and calibration. They also frequently have a built-in velocity stack, which further promotes airflow. What this all means is a simple-to-install system that was designed using extremely sophisticated technology to increase airflow while maintaining proper air / fuel ratios, therefore eliminating the need for re-calibration once installation is complete. Just bolt it on and go! Like any other AIRAID® Intake System, the MXP includes an AIRAID® Premium Filter that is sized to maximize power and efficiency. Learn More
$388.99 Kit
Corvette AIRAID® Cold Air Dam Intake System With Blue SynthaMax Filter, 6.0L, 2005-2007 Part # 25-339634-1
Includes A Premium SynthaMax Non-Oiled Air Filter Filter Is Washable And Reusable With A Lifetime Warranty Installation Instructions Included Made In The USA   It is a proven scientific fact that cold air is denser than hot air, which means that an engine breathing cold air is going to make more power than the identical engine breathing hot air. The quest for cold air is what drives the AIRAID® Cold Air Dam Intakes. The CAD Intakes retain the stock filter location but give the stock intake system a big boost with the addition of a huge air inlet that provides a steady, free-flowing supply of cold air. This is done via Cold Air Dam panels, which mount in the factory air box location and utilize any factory cold air inlet ducts that are present, while adding additional cold air passages to the filter. These panels also keep the filter isolated from the hot engine compartment air by sealing to the underside of the hood via blade-style weatherstripping. Each AIRAID® Cold Air Dam Intake is designed specifically for each vehicle application and offers a simple, trouble-free installation using simple hand tools. Like the rest of the AIRAID® systems, the CAD Intakes are Made in the USA and include all the necessary installation hardware as well as easy-to-understand instructions written with the do-it-yourselfer in mind. Like any other AIRAID® Intake System, this one includes an AIRAID® Premium Filter that is sized to maximize power and efficiency. Learn More
$363.99 Kit
Items 1 to 24 of 71 total Show per page Page:
  1. 1
  2. 2
  3. 3
  4. Next Page
Grid  List