Edelbrock Supercharger, E-Force, 554hp| 1590 Corvette 2008-2013

• Get Near 2009-2013 ZR1 Power From Your 2008-2013 C6
• Boost Horsepower 28% To 554 Flywheel Horsepower
• Boost Torque 21% To 515 Lbs. Feet Of Flywheel Torque
• Low Boost Pressure Provides Minimal Engine Stress
• Designed For Premium 91 Octane Fuel
• Full Boost By 2,000 RPM To The Redline
• Instant Throttle Response With No Boost Lag
• Integrated Bypass Valve Conserves Fuel
• Individual Runners For Each Cylinder For Maximum Low End Torque & Instant Response
• 100% Complete Compact Bolt-On Installation 
• Fits Under Your Stock Unmodified Hood
• Installs In Approximately 1-Day w/No Welding, Cutting, Or Grinding
• Includes A 3 Year, 36,000 Mile, Limited Powertrain Warranty To All Parts Free Of Charge

NOTES: Professional Installation Highly Recommended.  Custom Edelbrock Tuning (Included) Is Required To Maintain Your Supercharger System Warranty And Powertrain Warranty.  Your Corvette Will NOT Run Without Custom Edelbrock Tuning. 

Product Features:

• Unique Two-Tone Powder Coated Finish For Striking Appearance & Durability
• Eaton® TVS Rotor assembly; The Same High-Quality Rotors Used By GM On The Corvette ZR1
• Self Contained Oil System With 100,000 Mile Service Interval (No Drilling Or Plumbing Required)
• Easy To Use Electronic PCM Programming Module w/Edelbrock Custom Supercharger Tuning Included
• Plug & Play, Electrical Harness & Installation Hardware
• High Flow Air Intake Tube & Cleanable Gauze & Cotton Air Filter
• Cast Aluminum Tensioner/Idler Brackets & Engine Valley Tray
• High Flow 62 Lb. Per Hour Fuel Injectors
• Heavy Duty Automatic Belt Tensioner & Goodyear® Gatorback™ Serpentine Belt 
• Dual High Capacity, Bar & Plate Intercoolers, Electric Intercooler Water Pump, Recovery Tank, Molded Hose, & Quick Disconnect Fittings
• ZR1 Liquid To Liquid Oil Cooler
• Steel Idler Pulleys With Heavy Duty High Speed Bearings, 3.875" Supercharger Drive Pulley
• 50-State Emissions Legal E.O. # D-215-86
• Designed, Cast, And Manufactured In The USA By Edelbrock
• 3-Year Limited Manufacturer Warranty On Supercharger System
• FREE 3-Year/36,000 Mile Limited Manufacturer Powertrain Warranty Included

The 2008-2013 makes an astounding 430HP and 424 lbs. feet of torque. And, all that power propels you from 0-60 in 4.1 seconds, 12.5 @ 115MPH in the quarter mile, and a top speed of 190MPH! What if you want ZR1 power from your C6 but don't want to compromise drivability AND you don't want to spend ZR1 dollars to get it? Step up to Edelbrock's E-Force Stage 1 supercharger system. In just one day, YOUR C6 Corvette can have 554HP and 515 lbs. feet of torque (and that's ZR1 territory)!  And you can have this power on premium 91 octane pump gasoline AND with a FREE 3-year, 36,000 mile limited manufacturer powertrain warranty

The beauty of the Edelbrock system is they've thoroughly designed, engineered, and tested this system...leaving nothing to chance. After installation, drivability is just like your C6 now...except for the subtle blower whine and breathtaking performance when you put the pedal to the metal. That's drivability you'll never get from a built motor or from adding heads and a cam! They compromise idle quality, low-speed & mid range throttle response, and they aren't 50-state emission legal.

Each intercooled E-Force Stage 1 supercharger system comes 100% complete with no additional purchases needed. Everything fits like it should (just as if it were an OEM supercharger system). Of course, you wouldn't expect anything less from the recognized leader in aftermarket performance products. Edelbrock has been around for over 75 years and is a trusted, household brand for a reason:  they are fanatical about everything they do including engineering, design, testing, manufacturing, customer service and technical support. Enthusiasts know if it comes from Edelbrock, it's the best! Trust Eckler's Corvette to give your C6 Corvette truly world class performance!

2008-2013 (C6) Edelbrock Supercharger, E-Force, 554hp| 1590 Corvette