Easy Street EFI + Hy-Fuel Tight-Fit In-Tank Retrofit Master Kit w/Aluminum Finish
Product Details
- 4) Hi-Flow 600 HP injectors
- Simple touch screen selections get you up and running in minutes
- Self-tuning - After startup, the ECU immediately takes over and provides your vehicle with an optimum tune
- Bosch 4.2 wide band O2 sensor
- ECU is mounted on the throttle body so there is NO external boxes or harnesses to clutter up your engine compartment or under dash
- Universal base to fit any 4-bbl manifold
- Throttle linkage suits most transmissions
- Choice of three fuel inlet connections
- Voltage control fuel pump control
- Wet flow technology with unique Swirl Spray Annular discharge design
- Ignition timing can be controlled and adjusted on the fly from touch screen controller
- Air Fuel ratios can be optimized on the fly
- Will work with CDI box but not required to control timing
- Built in fuel pressure regulator
The Go EFI 4 with bright aluminum finish combined with the Hyperfuel™ Hy-Fuel Tight-Fit In-Tank Retrofit Kit is rated at 600HP but is suitable for engines from 200HP thru 650HP. This self-tuning fuel injection system is perfect for your everyday Driver right up to your weekend Street Machine or Bracket Racer. It features the fastest most accurate self-learning available, timing control, wet flow annular discharge and tons of additional features.
It fits any 4-bbl intake manifold and is the most self-contained and full-featured unit of this type. The ECU (computer) is mounted on the throttle body, which greatly simplifies installation. No hole in your firewall and no unsightly harness draped across your engine. This is also the only computer mounted throttle body that offers spark control without the need for an external spark box or special distributor. It also has a built-in fuel pressure regulator. A hand-held controller features a touch screen for quick and easy initial set-up.
The HyperFuel™ Hy-Fuel Tight-Fit In-Tank Retrofit Kit is a sleek miniature assembly allows you to fit a high-volume fuel system into almost any tank. This application is perfect for original or aftermarket fuel tanks as well as fuel cells with limited space. This application can also be used with a Tanks, Inc EFI tank.
FiTech Fuel Injection 600 HP Kit
WARNING This product can expose you to chemicals including Cadmium which is known to the State of California to cause cancer on birth defects or other reproductive harm. For more information, visit www.p65warnings.ca.gov
| Base Part Number | 850172 |
|---|---|
| Brand | N/A |
| Make / Model | Series | Body | Notes | Year |
|---|---|---|---|---|
| Make / Model | Series | Body | Notes | Year 0 |
| Make / Model Chevrolet Corvette Base | Series | Body | Notes | Year 1955, 1956, 1957, 1958, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1977, 1978, 1979, 1980, 1981 |
| Make / Model Chevrolet Corvette Indianapolis 500 Pace Car | Series | Body | Notes | Year 1978 |
| Make / Model Chevrolet Corvette Silver Anniversary Edition | Series | Body | Notes | Year 1978 |
| Make / Model Chevrolet Corvette Stingray | Series | Body | Notes | Year 1975, 1976 |