Corvette Wilwood Aero4 Rear 14" Brake Kit, 4-Piston Caliper Drilled & Slotted Rotors, 2014-2017

These AERO4 calipers from Wilwood were designed for the specific purpose of providing big capacity braking with large diameter rotors for the Corvette.  They provide pick up where the factory brakes left off by providing big brake performance for show and dual purpose street and track vehicles. This kit is fully compatible with OE parking brake, master cylinder output and ABS function. Directional staggered vane 14" drilled & slotted rotors provide maximum cooling for sustained high heat durability. Truck Eckler's Corvette for all your C5 and C6 performance, accessory, and restoration needs.

NOTE: Bedding-in new pads and rotors should be done carefully and slowly. Rapid heat build up in the brake system can lead to warped rotors and or glazed brake pads. Most brake pad compounds will take up to 300-400 miles to fully develop an even transfer film on the rotors. After installing new pads make 6 to 10 stops from approximately 35 mph with moderate pressure. Make an additional two to three hard stops from approximately 40 to 45 mph. Do not allow the vehicle to come to a complete stop.When completed with this process, park the vehicle and allow the brakes to cool completely before driving on them again. Do not engage the parking brake until after this cooling process is compete.

2014-2017 (C7) Corvette Wilwood Aero4 Rear 14" Brake Kit, 4-Piston Caliper Drilled & Slotted Rotors