Product Experts Available 1-800-284-3906

Filter Your Result

  1. Remove This Item Category: Exterior Parts and Trim
  2. Remove This Item Brand: 'RK Sport'
CATEGORY
  1. Accents (2)
  2. Body Parts (17)
  3. Ground Effects Kits (2)
  4. Louvers (1)
  5. Painted-to-Match Accessories (2)
  6. Roof Panels and T-Tops (1)
  7. Spoilers and Wings (2)
PRICE RANGE
  1. (2)
  2. (24)
  3. (1)
 

CORVETTE RK SPORT EXTERIOR PARTS AND TRIM

Items 1 to 24 of 27 total Show per page Page:
  1. 1
  2. 2
  3. Next Page
Grid  List 
1997-2004 Corvette Side Ground Effects RKSport Road Tour Part # 25-115252-1
Easy-To-Install Body Component Paint-To-Match Give your C5 an extraordinary new look! The Side Ground Effects are made of urethane and mount to the car with a combination of two-sided tape and/or supplied fasteners.   Learn More

Was: $395.99 PR

Now: $349.88 PR

2005-2013 Corvette RK Sport Body Kit Urethane Part # 25-261174-1
Urethane Construction Complete Front, Side And Rear Canards Fits The Standard C6 not Z06, ZR1 Or Grand Sport  Complete with Front Lower,Side Skirts and Rear Canards. This newest addition will help you create an original look that stays with the smooth lines of the C-6 body and will not create a boxy profile. Along with the original design, the quality and fit of this kit is ensured by the fact that it is manufactured of high quality urethane helping you guard against damages that can be caused by everyday driving hazards. Learn More

Was: $799.99 Kit

Now: $712.88 Kit

1997-2004 Corvette Fiberglass Hood RKSport Ram Air Part # 25-115248-1
Easy-To-Install Body Component Give your C5 an extraordinary new look. This hood is manufactured in hand laminated fiberglass with a baffled front inlet to direct road debris and water away from the engine. Just pre-fit, sand, prime and paint. Learn More

Was: $895.99 ea.

Now: $784.88 ea.

1997-2004 Corvette Fender Louvers RKSport Unpainted Part # 25-108614-1
Paint To Match Easy To Install Mounts With 3M Two-Sided Tape Urethane Construction Learn More

Was: $249.99 PR

Now: $228.88 PR

1997-2004 Corvette Front Bumper Canards RKSport Road Tour Part # 25-115250-1
Easy-To-Install Body Component Give your C5 an extraordinary new look! The Canards are made of urethane and mount to the car with a combination of two-sided tape and/or supplied fasteners. Learn More

Was: $245.99 PR

Now: $214.88 PR

2005-2011 Corvette Fiberglass Hood RKSport Ram Air Part # 25-245603-1
Best Quality Hand Laid Fiberglass Non-Functional Ram Air Scoop Will Not Work On Supercharged Corvette Ecklers brings you a hood from RKSport for your Corvette that really screams Musclecar! Non functional scoop really looks mean and the hood is made to stand out from every other Corvette out there. Learn More

Was: $895.99 ea.

Now: $796.88 ea.

1997-2004 Corvette Rear Spoiler RKSport Part # 25-108613-1
Mounts With 3M™ Two-Sided tape (No Drilling Required) Fiberglass Construction Ready To Sand, Prime & Paint Learn More

Was: $435.99 ea.

Now: $383.88 ea.

Corvette Side Spears, RKSport Road Tour, 1997-2004 Part # 25-115251-1
Easy-To-Install Body Component Give your C5 an extraordinary new look! The Side Spears are made of urethane and mount to the car with a combination of two-sided tape and/or supplied fasteners. Learn More

Was: $495.99 Set

Now: $436.88 Set

2005-2013 Corvette Supercharger Hood RKSport Part # 25-177175-1
Allows Room For Magnuson Supercharger Fiberglass Construction Ready To Fit, Sand, Prime & Paint Learn More

Was: $895.99 ea.

Now: $791.88 ea.

Corvette - RK Sport, RK5 Supercharger Hood, Fiberglass, 1997-2004 Part # 25-374963-1
High Quality Fiberglass Hood For C5 Hand Laid, Hi-Temp Fiberglass Finished In Gray Gel-Coat Ready For Pre-fit, Surface Prep & Paint Made In USA The RK5 hood's raised center provides the extra room need for the addition of a supercharger without disturbing the smooth flowing style the C5 Corvette is known for. NOTE: Will not fit with the Magnuson 2.3 TVS 2300 Supercharger. Learn More

: $988.99 ea.

Sale Price: $890.88 ea.

Corvette - RK Sport, Ram-Air Hood, Carbon Fiber Blister, 1997-2004 Part # 25-374964-1
High Quality Fiberglass Hood For C5 Hand Laid, Hi-Temp Fiberglass Base Deep Resin, Functional Carbon Fiber Scoop Installs With Original Hood Hardware Ready For Pre-fit, Surface Prep & Paint Made In USA Combine a healthy dose of style,  a hi-tech carbon fiber blister and a functional Ram Air Scoop and you get the perfect C5 Hood. Like all RKSport hoods it is manufactured using the finest hand-laid materials to provide superior strength and durability. Each part is finished in gel-coat (the carbon in clear / the fiberglass in gray) and is ready for prep and paint. Detailed instructions provide a straight-forward installation that uses stock hardware for an easy fit. NOTE: This hood will NOT work with a top mounted supercharger. Learn More

: $1,575.99 ea.

Sale Price: $1,418.88 ea.

1997-2004 Corvette RK Sport High Rise Hood Fiberglass Part # 25-374965-1
High Quality Fiberglass Hood For C5 Rises Through The Center To 1.75" At The Windshield  Hand Laid, Hi-Temp Fiberglass Finished In Gray Gel-Coat Ready For Pre-fit, Surface Prep & Paint Made In USA Retaining the factory hood lines, our RKSport hood gradually rises through the center until it reaches an increase of 1.75" inches at the windshield. This high quality Hood is crafted from Hi-Temp, Hand-Laid fiberglass for exceptional strength, quality and durability. Installation is straightforward using the stock Corvette hardware. Learn More

: $885.99 ea.

Sale Price: $797.88 ea.

Corvette - RK Sport, Supercharger Hood, Carbon Fiber, 2005-2013 Part # 25-374966-1
High Quality Hood For Your C6 Hand Laid, Deep Resin Carbon Fiber Top Hand Laid, Fiberglass Center Black Gel-coat Underside Uses Stock Hood Hardware For Installation Will Not Work With A Magnuson Supercharger On A Z06 This RKSport hood features a complete carbon fiber outer with a fiberglass inner and is specifically designed for the Magnuson Supercharger. The RKSport 05-13 C6 Carbon Fiber Supercharger Hood is a perfect blend of race car style with real world function. The C6 Supercharger hood retains the smooth flow of the original body lines while keeping the visual impact of the raised center to a minimum. Each RKSport hood is manufactured using the finest hand-laid materials to provide superior strength and durability. Each hood is shipped gel-coat clear. Detailed instructions provide a straight-forward installation that uses stock hardware for an easy fit and installation. Learn More

: $2,121.99 ea.

Sale Price: $1,909.88 ea.

Corvette - RK Sport, Ram Air Hood, With Carbon Fiber Blister, 2005-2013 Part # 25-374967-1
High Quality Fiberglass Hood For C6 Hand Laid, Hi-Temp Fiberglass Base Deep Resin, Functional Carbon Fiber Scoop Installs With Original Hood Hardware Ready For Pre-fit, Surface Prep & Paint Made In USA Combine a healthy dose of style,  a hi-tech carbon fiber blister and a functional Ram Air Scoop and you get the perfect C6 Hood. Like all RKSport hoods it is manufactured using the finest hand-laid materials to provide superior strength and durability. Each part is finished in gel-coat (the carbon in clear / the fiberglass in gray) and is ready for prep and paint. Detailed instructions provide a straight-forward installation that uses stock hardware for an easy fit. NOTE: This hood will NOT work with a top mounted supercharger. Learn More

: $1,575.99 ea.

Sale Price: $1,418.88 ea.

2006-2013 Corvette RK Sport, Z06 Violator Supercharger Hood, Fiberglass Part # 25-375013-1
High Quality Fiberglass Hood For C6 Hand Laid, Hi-Temp Fiberglass Base Designed For Z06  With Supercharger... Fits Any C6  Installs With Original Hood Hardware Ready For Pre-fit, Surface Prep & Paint Made In USA The Z06 Supercharger hood is 3/4 of an inch taller than the regular C6 Violator Hood. This hood will work on all C6 Vettes however it was designed to provide enough headroom for the Magnuson TVS2300 on a Z06. It has the most headroom of all our C6 hoods. Learn More

: $988.99 ea.

Sale Price: $890.88 ea.

Corvette - RK Sport, Whipple Supercharger Hood, Fiberglass, 2005-2013 Part # 25-375014-1
High Quality Fiberglass Hood For C6 Hand Laid, Hi-Temp Fiberglass Designed For All C6 Corvettes With Superchargers Including Z06  Installs With Original Hood Hardware Ready For Pre-fit, Surface Prep & Paint Made In USA Will fit with both the Magnuson and Whipple Superchargers - this hood has the most headroom of all the RKSport C6 Hoods and will fit all C6 models including Z06. Learn More

: $988.99 ea.

Sale Price: $890.88 ea.

Corvette - RK Sport Extractor Hood, Fiberglass, 2014-2017 Part # 25-375015-1
High Quality Fiberglass Hood For C7 Hand-Laid, High-Temp Fiberglass Aggressive Center Rise Rear Facing Extractor Scoops Made In USA When GM gives you a Design award for a car that already sets the standard for sophistication and style, you know you got it right! The RKSport hood offers a more aggressive center rise, relocates the heat extraction vents to the back of the hood and accentuates the long classic lines of the Vette's front end. Learn More

: $1,091.99 ea.

Sale Price: $982.88 ea.

Corvette - RK Sport C7 Extractor Hood, Fiberglass, With Carbon Fiber Bilster, 2014-2017 Part # 25-375053-1
High Quality Fiberglass Hood For C7 Hand Laid, Hi-Temp Fiberglass Base Deep Resin, Functional Carbon Fiber Scoop  With Rear Facing Extractor Vents  Installs With Original Hood Hardware Ready For Pre-fit, Surface Prep & Paint Made In USA When GM gives you a Design award for a car that already sets the standard for sophistication and style, you know you got it right! The RKSport hood offers a more aggressive center rise, relocates the heat extraction vents to the back of the hood and accentuates the long classic lines of the Vette's front end. This hood features a full, deep resin, high gloss carbon center blister. Learn More

: $1,781.99 ea.

Sale Price: $1,603.88 ea.

Corvette - RK Sport, C7 Extractor Hood, With Carbon Fiber Top, 2014-2017 Part # 25-375054-1
High Quality Fiberglass Hood For C7 Hand-Laid, High-Temp Fiberglass Deep Resin, High-Gloss Carbon Fiber Top Functional Rear Facing Extractor Scoops Attaches With Factory Hardware Made In USA When GM gives you a Design award for a car that already sets the standard for sophistication and style, you know you got it right! The RKSport hood offers a more aggressive center rise, relocates the heat extraction vents to the back of the hood and accentuates the long classic lines of the Vette's front end. This hood features a full, deep resin, high gloss carbon fiber top. Underside is sealed in a black gel coat and hood ships ready to install, no paint required. Learn More

: $2,224.99 ea.

Sale Price: $2,002.88 ea.

Corvette - RK Sport, RK5 Supercharger Hood, With Carbon Fiber Blister, 1997-2004 Part # 25-375093-1
High Quality Fiberglass Hood For C5 Hand Laid, Hi-Temp Fiberglass Center  Deep Resin Carbon Fiber Blister With High Gloss Marine Grade Finish  Ready For Pre-fit, Surface Prep & Paint Made In USA This RK5 Hood was designed for use with the Magnuson Supercharger which requires more clearance under the hood. Nothing says "Performance" like Carbon Fiber and this Supercharger hood features a deep, rich, hand laid carbon fiber center section. The fiberglass portion of the hood comes gel coated in gray and is ready for paint and prep. The carbon fiber blister is finished with a marine grade clear gel coat for protection and a high gloss shine. NOTE: Will not fit with the Magnuson 2.3 TVS 2300 Supercharger. Learn More

: $1,575.99 ea.

Sale Price: $1,418.88 ea.

Corvette Violator Supercharge Hood, Carbon Fiber, 2005-2013 Part # 25-248137-1
Replacement Hood Carbon Fiber Material Ready To Fit & Paint Uses All The Original Hardware From Stock Hood NOTE:  Shown in fiberglass with gray gelcoat. Based off the same great lines and high rise cowl section of the RKSport supercharger hood, the Violator adds a distinct look with the addition of two head extractor vents. This new design will allow hot air, normally trapped under the hood, to vent easily to the outside. Learn More

: $1,746.99 ea.

Sale Price: $1,677.88 ea.

Corvette Violator Supercharge Hood, 2005-2013 Part # 25-248138-1
Replacement Hood Fiberglass Material Ready To Fit, Sand, Prime & Paint Uses All The Original Hardware From Stock Hood Based off the same great lines and high rise cowl section of the RKSport supercharger hood, the Violator adds a distinct look with the addition of two head extractor vents. This new design will allow hot air, normally trapped under the hood, to vent easily to the outside. Learn More

Was: $899.99 ea.

Now: $791.88 ea.

2005-2013 Corvette Carbon Fiber Targa Roof Cover Part # 25-248140-1
Sets Your Corvette Apart From the Pack Hand Laminated Carbon Fiber Perfect Fit & Finish Bonded To OE Targa Roof Made from hand-laid carbon fiber with refined contours, the carbon fiber targa roof cover will set your C6 apart from the pack. RKSports molded design will easily bond directly to the original OE Targa roof panel. You will be impressed with the quality of the fit and finish.NOTE: Recommend purchasing 3M Automix #8219 at your local automotive paint supply store. Instructions shown on this web giving you the procedure to install this great looking product. Learn More

: $696.99 ea.

Sale Price: $669.88 ea.

1997-2004 Corvette Rear Bumper RKSport Road Tour Part # 25-115253-1
Easy-To-Install Body Component Give your C5 an extraordinary new look! The rear bumper is made of hand laminated fiberglass and mounts to the car with existing hardware. Purchase the RKSport/MagnaFlow exhaust with the road tour bumper and receive a 10% off discount. NOTE:  Must Use P/N 42453 Exhaust System With Bumper. Did you know? Many people in our hobby refer to the rear bumper as a rear fascia or rear bumper cover. Learn More

Was: $939.99 ea.

Now: $881.88 ea.

Items 1 to 24 of 27 total Show per page Page:
  1. 1
  2. 2
  3. Next Page
Grid  List