2014-18 K&N Cold AirFilter/Intake, W/Rechgr
Fitment
Product Details
- Fits 2014-2018 C7 Corvette Stingrays (Will Not Fit Supercharger & Turbo Systems)
- High Performance Cold Air Intake Upgrade
- Adds Up To 12.5HP & 16.63 Lbs. Feet Of Torque To The Rear Wheels
- Larger Genuine Carbon Fiber Air Intake Tube And Oversized K&N Performance Air Filter
- Unique Pleated Air Filter Design - Straightens Incoming Air & Increases Airflow Up To 57% Over Paper Filters
- Improves Performance - Releases More Horsepower, Better Throttle Response, Deeper Sound
- Superior Engine Protection - 4 To 6 Layer Gauze & Cotton Filter Is 98.43% Efficient
- Direct-Bolt On With Basic Hand Tools, No Cutting Or Drilling On OEM Parts
- Includes All Necessary Hardware And Detailed Instructions
- 1-Million Mile Limited Manufacturer Warranty
- Made In The USA
- NOTE: Cannot Be Sold Or Shipped To California & New York
- NOTE: Cannot Be Sold In Or Shipped To New York Or California
- NOTE: Re-Usable - Clean And Re-Oil Every 12,000 to 50,000 Miles Depending On Conditions
When 460HP isn't enough, you'll want to find simple, bolt-on products that improve performance without voiding your factory powertrain warranty. The factory air intake system is restrictive because it was designed for maximum space efficiency rather than maximum power. Should you decide to add a higher flowing exhaust or a flash computer tuner for even greater power, the factory air intake system will hold you back. The solution is this K&N high flow performance air intake system from Eckler's Corvette.
The larger free-flowing tube and oversized pleated air filter are engineered to maximize performance. By minimizing restriction and straitening air flow, you'll increase airflow, improve engine efficiency, and realize up to 12.5HP and 16.63 lbs. feet of torque to the rear wheels. As a rule, anytime you can add 10HP or more to the rear wheels, you'll be able to feel to difference. In this case, you'll not only feel it but you'll hear it too! K&N's air intake system has a deeper and throatier sound under acceleration...just enough to let the competition know there's something different under your hood.
The K&N C7 cold air intake features a custom carbon fiber top and bottom, integrated heat shield for colder & denser air, a roto molded urethane air intake tube with a raised K&N logo, and an oversized version of K&N's performance proven air filter. K&N's air filter is washable, cleanable, and allows you to travel up to 50,000 miles between cleanings (depending on your driving conditions). With basic hand tools you already own and by following the step-by-step instructions, you can install this air intake in as little as 90 minutes. And, installation requires no drilling, cutting, or permanent modifications. Best of all, K&N's C7 Corvette performance air intake system is made in the USA and backed by K&N's famous Million Mile limited manufacturer's warranty. Trust Eckler's Corvette for all of your C7 2014-2018 Corvette Stingray performance parts and accessories.
2014-2018 Corvette (C7) K&N Cold Air Filter/Intake System, W/Rechgr
2014-2018 Corvette (C7) K&N Cold Air Filter/Intake System, W/Rechgr
WARNING This product can expose you to chemicals including HEXAVALENT which is known to the State of California to cause cancer on birth defects or other reproductive harm. For more information, visit www.p65warnings.ca.gov
Base Part Number | 392089 |
---|---|
Brand | K&N |
Make / Model | Series | Body | Notes | Year |
---|---|---|---|---|
Make / Model Chevrolet Corvette Grand Sport | Series | Body | Notes | Year 2017, 2018 |
Make / Model Chevrolet Corvette Stingray | Series | Body | Notes | Year 2014, 2015, 2016, 2017, 2018 |
Make / Model Chevrolet Corvette Z06 | Series | Body | Notes | Year 2015, 2016, 2017, 2018 |
Make / Model Chevrolet Corvette Z51 | Series | Body | Notes | Year 2014, 2015, 2016 |