1980-1982 Corvette Front Bumper Stock Design Flex-Fit

• Patterned After Original 1980-1982 C3 Corvette Front Bumper
• Precision Fit - Heavily Reinforced Molds Are Adapted From Original GM Panels
• Unequalled Finish - Finest Automotive Grade Resins With 3 Layers Of 3.5 Oz Mat & 21 Mils of Soft Sanding Gel Coat
• Premium Quality - Our Hand Rolled Process Is Stronger & Free Of Bubbles & Waves
• Superior Strength - Proper Reinforcements
• Save Time & Money - Precision Trimming Minimizes Prep Time
• Flex-Fit Fiberglass Is Construction Superior To Original Urethane
• Flex-Fit Fiberglass Allows For Ease Of Installation
• Made In The USA
• Must Use Retainers P/N 25-108240-1
• NOTE:  Fiberglass Panels Require Fitting, Trimming, Shimming, And Special Finishing.  Unless You Are Experienced In Working With Fiberglass, Eckler’s Recommends Using A Qualified Body Shop.  Eckler's Offer The Most Complete Line Of Fiberglass Repair Materials As Well As Professional Fiberglass Prepping And Finishing DVD's - Volume 1 P/N 46383, Volume 2 P/N 46384.  Our DVD's Are Loaded With Helpful Fiberglass Prepping And Finishing Tips That Will Help You Finish Your Project Right.  

At first glance, all aftermarket fiberglass bumpers may look the same. During the 1980's and 1990's, several aftermarket companies tried reproducing fiberglass bumpers. However, many short cuts were taken to save costs. The end result were bumpers full of air bubbles and waves. The amount of prep work required was time consuming and frustrating for body shops and expensive for consumers. Even worse, these cheap bumpers didn't have the proper reinforcements in them so fitment was a major issue.  That's definitely not OK for driver, show car, or investment Corvette. Those were the 1980's and 1990's and definitely NEVER the case at Eckler's Corvette.

Body shops and do-it-yourself enthusiasts have trusted Eckler's Corvette as their #1 fiberglass source since 1965. They've tried other brands that just don't measure up in quality, durability, fit, and finish. Eckler's has invested heavily in research and development, manufacturing processes, and quality control techniques. The result is the finest quality fiberglass bumpers that fit right the first time and with minimal prep work required. Eckler's Corvette fiberglass bumpers are painstakingly reproduced from the original GM body panels. Eckler's overbuilds every mold with heavy reinforcements to ensure consistent quality and a superior fit. They are NOT built using a chopper gun as with cheaper imitations. Eckler's utilizes only the best automotive grade resins with 3 layers of 3.5 ounces of mat and 21 mils of soft sanding gel coat. Eckler's superior hand-rolled fiberglass process eliminates troublesome bubbles and frustrating waves. Eckler's fiberglass bumpers are precision trimmed and drilled to eliminate fitment issues. All of this eliminates hassles, frustrations, and disappointments while saving you valuable time and money. Do it right the first time and insist on only the best fiberglass for your Corvette by demanding Eckler's Corvette fiberglass.

1980-1982 (C3) Premier Quality Products, Front Bumper, Stock Design, Flex-Fit| C814FQ Corvette